Hi > > +Required properties: > > + - compatible: Must be "ti,hd3ss3220". > > + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. > > + - interrupts: <a b> where a is the interrupt number and b represents an > > + encoding of the sense and level information for the interrupt. > > + > > +Required sub-node: > > + - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The > > s/connector :/connector:/ Maybe it is for alignment ? > According to the connector/usb-connector.txt, should the connector node > have ports, port@1 and an endpoint nodes like below? "ports" is needed if it has multiple "port", otherwise, single port is allowed from OF-graph point of view. Thank you for your help !! Best regards --- Kuninori Morimoto
