RE: [PATCH] ARM: shmobile: Remove GENERIC_PHY from shmobile_defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Simon,

Thanks for the feedback.

> Subject: Re: [PATCH] ARM: shmobile: Remove GENERIC_PHY from
> shmobile_defconfig
> 
> On Wed, Apr 24, 2019 at 09:44:11AM +0000, Biju Das wrote:
> > Hi Simon,
> >
> > Thanks for the feedback.
> >
> > I missed to add the dependency for this patch.
> >
> > This patch has dependency on
> > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/co
> > mmit/?h=next-20190424&id=5d8042e95fd471d0e342cf14f127194f1a867a01
> 
> Thanks, but I see the same result with this patch applied on top of
> 
> 5d8042e95fd4 phy: rcar-gen3-usb2: Add support for r8a77470

That is strange.  Have you ran make shmobile_defconfig after applying the patch?

I get the following result with renesas- devel-20190423-v5.1-rc5.

CONFIG_GENERIC_PHY=y                                                                                                                                                                                                                                               
# CONFIG_BCM_KONA_USB2_PHY is not set                                            
# CONFIG_PHY_CADENCE_DP is not set                                               
# CONFIG_PHY_CADENCE_DPHY is not set                                             
# CONFIG_PHY_CADENCE_SIERRA is not set                                           
# CONFIG_PHY_FSL_IMX8MQ_USB is not set                                           
# CONFIG_PHY_PXA_28NM_HSIC is not set                                            
# CONFIG_PHY_PXA_28NM_USB2 is not set                                            
# CONFIG_PHY_CPCAP_USB is not set                                                
# CONFIG_PHY_MAPPHONE_MDM6600 is not set                                         
CONFIG_PHY_RCAR_GEN2=y                                                           
# CONFIG_PHY_RCAR_GEN3_PCIE is not set                                           
CONFIG_PHY_RCAR_GEN3_USB2=y   

Regards,
Biju

> > > -----Original Message-----
> > > From: Simon Horman <horms@xxxxxxxxxxxx>
> > > Sent: 24 April 2019 10:33
> > > To: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > > Cc: Biju Das <biju.das@xxxxxxxxxxxxxx>; Magnus Damm
> > > <magnus.damm@xxxxxxxxx>; Russell King <linux@xxxxxxxxxxxxxxx>;
> > > Linux- Renesas <linux-renesas-soc@xxxxxxxxxxxxxxx>; Linux ARM
> > > <linux-arm- kernel@xxxxxxxxxxxxxxxxxxx>; Geert Uytterhoeven
> > > <geert+renesas@xxxxxxxxx>; Chris Paterson
> > > <Chris.Paterson2@xxxxxxxxxxx>; Fabrizio Castro
> > > <fabrizio.castro@xxxxxxxxxxxxxx>
> > > Subject: Re: [PATCH] ARM: shmobile: Remove GENERIC_PHY from
> > > shmobile_defconfig
> > >
> > > On Wed, Apr 24, 2019 at 09:12:04AM +0200, Geert Uytterhoeven wrote:
> > > > On Tue, Apr 23, 2019 at 3:20 PM Biju Das <biju.das@xxxxxxxxxxxxxx>
> > > wrote:
> > > > > Remove the GENERIC_PHY config option from shmobile_defconfig, as
> > > > > it is selected by PHY_RCAR_GEN3_USB2.
> > > > >
> > > > > PHY_RCAR_GEN3_USB2 is enabled by the commit
> > > > > 0cd4f4f10245d1d9616e00245
> > > > > ("ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in
> > > shmobile_defconfig").
> > > > >
> > > > > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > > >
> > > > Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > >
> > > This does not seem to work as expected when applied on top of
> > > renesas- devel-20190423-v5.1-rc5.
> > >
> > > Without this patch I see both CONFIG_GENERIC_PHY and
> > > CONFIG_PHY_RCAR_GEN selected. With this patch I see neither
> > > selected, I expected both.
> > >
> > > --- .config.old	2019-04-24 11:31:12.480520934 +0200
> > > +++ .config	2019-04-24 11:31:34.732852122 +0200
> > > @@ -4272,7 +4272,7 @@
> > >  #
> > >  # PHY Subsystem
> > >  #
> > > -CONFIG_GENERIC_PHY=y
> > > +# CONFIG_GENERIC_PHY is not set
> > >  # CONFIG_BCM_KONA_USB2_PHY is not set  #
> CONFIG_PHY_CADENCE_DP is
> > > not set  # CONFIG_PHY_CADENCE_DPHY is not set @@ -4282,7 +4282,6
> @@
> > > # CONFIG_PHY_PXA_28NM_USB2 is not set  # CONFIG_PHY_CPCAP_USB
> is not
> > > set  # CONFIG_PHY_MAPPHONE_MDM6600 is not set -
> > > CONFIG_PHY_RCAR_GEN2=y  # CONFIG_PHY_RCAR_GEN3_PCIE is not
> set  #
> > > CONFIG_PHY_RCAR_GEN3_USB3 is not set  # CONFIG_POWERCAP is not
> set
> >




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux