Re: [PATCH 0/4] Add TPU support for R-Car H3/M3-W/M3-N

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Geert-san,

On 2019/04/24 16:49, Geert Uytterhoeven wrote:
Hi Cao,

On Tue, Apr 16, 2019 at 3:56 AM Cao Van Dong <cv-dong@xxxxxxxxxxx> wrote:
This series adds tpu support for r8a7795/r8a7796/r8a77965 SoCs.
Based on the renesas-drivers-2019-04-02-v5.1-rc3 tag of renesas-drivers tree.

For test: After booting, I found the device was registered in the boot log.
Thanks for your series!

Cao Van Dong (4):
   arm64: dts: renesas: r8a7795: Add TPU support
   arm64: dts: renesas: r8a7796: Add TPU support
   arm64: dts: renesas: r8a77965: Add TPU support
   dt-bindings: pwm: renesas: tpu: Document R8A779{5|6|65} bindings

  Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt |  3 +++
  arch/arm64/boot/dts/renesas/r8a7795.dtsi                  | 11 +++++++++++
  arch/arm64/boot/dts/renesas/r8a7796.dtsi                  | 11 +++++++++++
  arch/arm64/boot/dts/renesas/r8a77965.dtsi                 | 11 +++++++++++
  drivers/clk/renesas/r8a7795-cpg-mssr.c                    |  1 +
  drivers/clk/renesas/r8a7796-cpg-mssr.c                    |  1 +
  drivers/clk/renesas/r8a77965-cpg-mssr.c                   |  1 +
  7 files changed, 39 insertions(+)
Please split off the clock driver changes into separate patches, as DTS and
clock driver changes go in through different subsystem/maintainer paths.
Thanks for your feedback!
I will separate them and re-submit it with the v2 mask.

Thank you,
Dong
Gr{oetje,eeting}s,

                         Geert




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux