[PATCH 0/4] Add TPU support for R-Car H3/M3-W/M3-N

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds tpu support for r8a7795/r8a7796/r8a77965 SoCs.
Based on the renesas-drivers-2019-04-02-v5.1-rc3 tag of renesas-drivers tree.

For test: After booting, I found the device was registered in the boot log.

Cao Van Dong (4):
  arm64: dts: renesas: r8a7795: Add TPU support
  arm64: dts: renesas: r8a7796: Add TPU support
  arm64: dts: renesas: r8a77965: Add TPU support
  dt-bindings: pwm: renesas: tpu: Document R8A779{5|6|65} bindings

 Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt |  3 +++
 arch/arm64/boot/dts/renesas/r8a7795.dtsi                  | 11 +++++++++++
 arch/arm64/boot/dts/renesas/r8a7796.dtsi                  | 11 +++++++++++
 arch/arm64/boot/dts/renesas/r8a77965.dtsi                 | 11 +++++++++++
 drivers/clk/renesas/r8a7795-cpg-mssr.c                    |  1 +
 drivers/clk/renesas/r8a7796-cpg-mssr.c                    |  1 +
 drivers/clk/renesas/r8a77965-cpg-mssr.c                   |  1 +
 7 files changed, 39 insertions(+)

-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux