Hi Shimoda-San,
Thanks for the feedback.
> Subject: RE: [PATCH V4 02/13] phy: renesas: phy-rcar-gen2: Add support for
> r8a77470
>
> Hi Biju-san,
>
> Thank you for the patch!
>
> > From: Biju Das, Sent: Wednesday, April 10, 2019 5:08 PM
> <snip>
> > static int rcar_gen2_phy_probe(struct platform_device *pdev) {
> > struct device *dev = &pdev->dev;
> > @@ -238,6 +313,8 @@ static int rcar_gen2_phy_probe(struct
> platform_device *pdev)
> > struct resource *res;
> > void __iomem *base;
> > struct clk *clk;
> > + const struct phy_ops *gen2_phy_ops = &rcar_gen2_phy_ops;
> > + const u32 (*select_value)[PHYS_PER_CHANNEL] = pci_select_value;
> > int i = 0;
> >
> > if (!dev->of_node) {
> > @@ -266,6 +343,11 @@ static int rcar_gen2_phy_probe(struct
> platform_device *pdev)
> > drv->clk = clk;
> > drv->base = base;
> >
> > + if (soc_device_match(soc_r8a77470)) {
>
> I'm not sure, but this driver also should not use the soc_device_match() like
> phy-rcar-gen3-usb2 driver?
> If we add a special data struct and has phy_ops and select_value members,
> we can achieve not to use the soc_device_match().
There is a difference compared to phy-rcar-gen3-usb2 driver.
Here we are using generic compatible string for RZ/G1C.
With the new proposal, I need to make following changes.
1) Add r8a77470 compatible in phy_match table, fill the driver_data structure and remove soc_device_match
2) Modify the SoC dtsi to remove generic compatible string.
I will send V5 based on new proposal, if you are ok for removing generic compatibility.
Please let me know.
Regards,
Biju
