Hi Simon,
On Fri, Mar 22, 2019 at 11:23 AM Simon Horman <horms@xxxxxxxxxxxx> wrote:
> On Wed, Mar 20, 2019 at 08:44:09PM +0100, Geert Uytterhoeven wrote:
> > Enable the I2C bus, and add the following devices:
> > - Two CAT9554 port expanders (8 GPIOs, interrupt not wired by
> > default),
> > - R1EX24016ASAS0A EEPROM.
> >
> > The bus also contains a MAX9856 Audio Codec, which is not yet supported.
> >
> > All devices (incl. the audio codec) are documented to support an I2C bus
> > running at 400 kHz.
> >
> > Pinctrl is based on the RZ/A BSP.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > Pending acceptance of the DT binding patches documenting the
> > "onnn,cat9554" and "renesas,r1ex24016" compatible values.
>
> Thanks.
>
> I'm marking this series as deferred pending acceptance of the bindings.
> Please repost or ping me once that has happened.
next-20190325 has:
d333bad1f6f3e0df dt-bindings: at24: add Renesas R1EX24016
5c9f8cfe3cb67dcb dt-bindings: gpio: pca953x: Document onnn,cat9554
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
