On Tue, Mar 05, 2019 at 01:06:52PM +0100, Ulrich Hecht wrote:
>
> > On February 13, 2019 at 11:32 AM Simon Horman <horms+renesas@xxxxxxxxxxxx> wrote:
> >
> >
> > From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@xxxxxxxxxxx>
> >
> > According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
> > August 24, 2018, the TX clock internal Delay mode does'nt support
> > on R-Car D3. This patch fixes EthernetAVB phy mode to rgmii.
> >
> > This is achieved by simply dropping the phy-mode property from
> > r8a77995-draak.dts as the default property for this for r8a77995,
> > as set in r8a77995.dtsi, is "rgmii".
> >
> > Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@xxxxxxxxxxx>
> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
> > Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> > index db2bed1751b8..bfa260c9f78c 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> > @@ -168,7 +168,6 @@
> > pinctrl-names = "default";
> > renesas,no-ether-link;
> > phy-handle = <&phy0>;
> > - phy-mode = "rgmii-txid";
> > status = "okay";
> >
> > phy0: ethernet-phy@0 {
> > --
> > 2.11.0
> >
>
> Works for me.
>
> Tested-by: Ulrich Hecht <uli+renesas@xxxxxxxx>
Thanks, applied for v5.2.
