When declaring the HSPI RX1_B and TX1_B pins, two mistakes were made:
- the rows and columns in the BGA pin matrix, from which the pin
numbers are derived, were exchanged,
- it was not taken into account that BGA pin row labelling skips
characters I, O, Q, and S.
Fix the order, and the corresponding pin names.
Notes:
- The actual values of the pin numbers don't really matter (they just
have to be unique), so the wrong order didn't have any impact,
- Changing the names of the pins is user-visible, but there are no
users in (upstream) DTS files.
Fixes: 4f82e3ee724f1712 ("sh-pfc: Support pins not associated with a GPIO port")
Fixes: 09cc76a95802e87d ("sh-pfc: r8a7778: add HSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in sh-pfc-for-v5.1.
drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
index 6bcdb4b5e69e7ff1..068b5e6334d148d4 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
@@ -1264,8 +1264,8 @@ static const struct sh_pfc_pin pinmux_pins[] = {
/* Pins not associated with a GPIO port */
SH_PFC_PIN_NAMED(3, 20, C20),
- SH_PFC_PIN_NAMED(20, 1, T1),
- SH_PFC_PIN_NAMED(25, 2, Y2),
+ SH_PFC_PIN_NAMED(1, 20, A20),
+ SH_PFC_PIN_NAMED(2, 25, B25),
};
/* - macro */
@@ -1400,7 +1400,7 @@ HSPI_PFC_DAT(hspi1_a, HSPI_CLK1_A, HSPI_CS1_A,
HSPI_RX1_A, HSPI_TX1_A);
HSPI_PFC_PIN(hspi1_b, RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 26),
- PIN_NUMBER(20, 1), PIN_NUMBER(25, 2));
+ PIN_NUMBER(1, 20), PIN_NUMBER(2, 25));
HSPI_PFC_DAT(hspi1_b, HSPI_CLK1_B, HSPI_CS1_B,
HSPI_RX1_B, HSPI_TX1_B);
--
2.17.1
