From: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
MOD_SEL register bit numbering was different from R-Car D3 SoC and
R-Car H3/M3-[WN] SoCs.
MOD_SEL 1-bit H3/M3-[WN] D3
=============== ========== =====
Set Value = H'0 b'0 b'0
Set Value = H'1 b'1 b'1
MOD_SEL 2-bits H3/M3-[WN] D3
=============== ========== =====
Set Value = H'0 b'00 b'00
Set Value = H'1 b'01 b'10
Set Value = H'2 b'10 b'01
Set Value = H'3 b'11 b'11
MOD_SEL 3-bits H3/M3-[WN] D3
=============== ========== =====
Set Value = H'0 b'000 b'000
Set Value = H'1 b'001 b'100
Set Value = H'2 b'010 b'010
Set Value = H'3 b'011 b'110
Set Value = H'4 b'100 b'001
Set Value = H'5 b'101 b'101
Set Value = H'6 b'110 b'011
Set Value = H'7 b'111 b'111
This patch replaces the #define name and value of MOD_SEL.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Fixes: 794a67117646 ("pinctrl: sh-pfc: Initial R8A77995 PFC support")
[shimoda: split a patch per SoC and revise the commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
[geert: Use a macro to do the actual reordering]
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Untested as we don't know how to test the impact of MOD_SEL bits on
output pins.
Using a macro makes the code easier to write, read, and maintain.
Use "git show --color-words" to see the difference.
I'd love to handle the reversal in the PINMUX_CFG_REG_VAR()
descriptions, but I can't use e.g. REV4(MOD_SEL0_24_23) there, as
MOD_SEL0_24_23 is a single parameter, not 4 parameters.
Can this be improved?
---
drivers/pinctrl/sh-pfc/pfc-r8a77995.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
index 84d78db381e30249..9e377e3b9cb3c20c 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
@@ -381,6 +381,9 @@ FM(IP12_23_20) IP12_23_20 \
FM(IP12_27_24) IP12_27_24 \
FM(IP12_31_28) IP12_31_28 \
+/* The bit numbering in MOD_SEL fields is reversed */
+#define REV4(f0, f1, f2, f3) f0 f2 f1 f3
+
/* MOD_SEL0 */ /* 0 */ /* 1 */ /* 2 */ /* 3 */
#define MOD_SEL0_30 FM(SEL_MSIOF2_0) FM(SEL_MSIOF2_1)
#define MOD_SEL0_29 FM(SEL_I2C3_0) FM(SEL_I2C3_1)
@@ -388,10 +391,10 @@ FM(IP12_31_28) IP12_31_28 \
#define MOD_SEL0_27 FM(SEL_MSIOF3_0) FM(SEL_MSIOF3_1)
#define MOD_SEL0_26 FM(SEL_HSCIF3_0) FM(SEL_HSCIF3_1)
#define MOD_SEL0_25 FM(SEL_SCIF4_0) FM(SEL_SCIF4_1)
-#define MOD_SEL0_24_23 FM(SEL_PWM0_0) FM(SEL_PWM0_1) FM(SEL_PWM0_2) F_(0, 0)
-#define MOD_SEL0_22_21 FM(SEL_PWM1_0) FM(SEL_PWM1_1) FM(SEL_PWM1_2) F_(0, 0)
-#define MOD_SEL0_20_19 FM(SEL_PWM2_0) FM(SEL_PWM2_1) FM(SEL_PWM2_2) F_(0, 0)
-#define MOD_SEL0_18_17 FM(SEL_PWM3_0) FM(SEL_PWM3_1) FM(SEL_PWM3_2) F_(0, 0)
+#define MOD_SEL0_24_23 REV4(FM(SEL_PWM0_0), FM(SEL_PWM0_1), FM(SEL_PWM0_2), F_(0, 0))
+#define MOD_SEL0_22_21 REV4(FM(SEL_PWM1_0), FM(SEL_PWM1_1), FM(SEL_PWM1_2), F_(0, 0))
+#define MOD_SEL0_20_19 REV4(FM(SEL_PWM2_0), FM(SEL_PWM2_1), FM(SEL_PWM2_2), F_(0, 0))
+#define MOD_SEL0_18_17 REV4(FM(SEL_PWM3_0), FM(SEL_PWM3_1), FM(SEL_PWM3_2), F_(0, 0))
#define MOD_SEL0_15 FM(SEL_IRQ_0_0) FM(SEL_IRQ_0_1)
#define MOD_SEL0_14 FM(SEL_IRQ_1_0) FM(SEL_IRQ_1_1)
#define MOD_SEL0_13 FM(SEL_IRQ_2_0) FM(SEL_IRQ_2_1)
--
2.17.1
