Hi Laurent,
On Wed, Jan 09, 2019 at 02:15:04AM +0200, Laurent Pinchart wrote:
> Hello,
>
> On Monday, 7 January 2019 14:36:28 EET Kieran Bingham wrote:
> > On 06/01/2019 15:54, Jacopo Mondi wrote:
> > > When the adv748x driver is informed about a link being created from HDMI
> > > or AFE to a CSI-2 TX output, the 'link_setup()' callback is invoked. Make
> > > sure to implement proper routing management at link setup time, to route
> > > the selected video stream to the desired TX output.
> >
> > Overall this looks like the right approach - but I feel like the
> > handling of the io10 register might need some consideration, because
> > it's value depends on the condition of both CSI2 transmitters, not just
> > the currently parsed link.
> >
> > I had a go at some pseudo - uncompiled/untested code inline as a suggestion.
> >
> > If you think it's better - feel free to rework it in ... or not as you
> > see fit.
> >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > ---
> > >
> > > drivers/media/i2c/adv748x/adv748x-core.c | 57 +++++++++++++++++++++++-
> > > drivers/media/i2c/adv748x/adv748x.h | 2 +
> > > 2 files changed, 58 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c
> > > b/drivers/media/i2c/adv748x/adv748x-core.c index
> > > 200e00f93546..a586bf393558 100644
> > > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > > @@ -335,6 +335,60 @@ int adv748x_tx_power(struct adv748x_csi2 *tx, bool
> > > on)
> > > /* ----------------------------------------------------------------------
> > > * Media Operations
> > > */
> > > +static int adv748x_link_setup(struct media_entity *entity,
> > > + const struct media_pad *local,
> > > + const struct media_pad *remote, u32 flags)
> > > +{
> > > + struct v4l2_subdev *rsd = media_entity_to_v4l2_subdev(remote->entity);
> > > + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> > > + struct adv748x_state *state = v4l2_get_subdevdata(sd);
> > > + struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> > > + bool enable = flags & MEDIA_LNK_FL_ENABLED;
> > > + u8 io10;
> > > +
> > > + /* Refuse to enable multiple links to the same TX at the same time. */
> > > + if (enable && tx->src)
> > > + return -EINVAL;
> > > +
> > > + /* Set or clear the source (HDMI or AFE) and the current TX. */
> > > + if (rsd == &state->afe.sd)
> > > + state->afe.tx = enable ? tx : NULL;
> > > + else
> > > + state->hdmi.tx = enable ? tx : NULL;
> > > +
> > > + tx->src = enable ? rsd : NULL;
> > > +
> > > + if (!enable)
> > > + return 0;
> >
> > Don't we potentially want to take any action on disable to power down
> > links below ?
> >
> > > +
> > > + /* Change video stream routing, according to the newly enabled link. */
> > > + io10 = io_read(state, ADV748X_IO_10);
> > > + if (rsd == &state->afe.sd) {
> > > + /*
> > > + * Set AFE->TXA routing and power off TXB if AFE goes to TXA.
> > > + * if AFE goes to TXB, we need both TXA and TXB powered on.
> > > + */
> > > + io10 &= ~ADV748X_IO_10_CSI1_EN;
> > > + io10 &= ~ADV748X_IO_10_CSI4_IN_SEL_AFE;
> > > + if (is_txa(tx))
> > > + io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE;
> >
> > Shouldn't the CSI4 be enabled here too? or are we assuming it's already
> > (/always) enabled?
> > io10 |= ADV748X_IO_10_CSI4_EN;
> >
> > > + else
> > > + io10 |= ADV748X_IO_10_CSI4_EN |
> > > + ADV748X_IO_10_CSI1_EN;
> > > + } else {
> > > + /* Clear AFE->TXA routing and power up TXA. */
> > > + io10 &= ~ADV748X_IO_10_CSI4_IN_SEL_AFE;
> > > + io10 |= ADV748X_IO_10_CSI4_EN;
> >
> > But if we assume it's already enabled ... do we need this?
> > Perhaps it might be better to be explicit on this?
> >
> > > + }
> > > + io_write(state, ADV748X_IO_10, io10);
> >
> > Would it be any cleaner to use io_clrset() here?
> >
> > Hrm ... also it feels like this register really should be set depending
> > upon the complete state of ... &state->...
> >
> > So perhaps it deserves it's own function which should be called after
> > csi_registered() callback and any link change.
> >
> > /me has a quick go at some psuedo codeishness...:
> >
> > int adv74x_io_10(struct adv748x_state *state);
> > u8 bits = 0;
> > u8 mask = ADV748X_IO_10_CSI1_EN
> >
> > | ADV748X_IO_10_CSI4_EN
> > | ADV748X_IO_10_CSI4_IN_SEL_AFE;
> >
> > if (state->afe.tx) {
> > /* AFE Requires TXA enabled, even when output to TXB */
> > bits |= ADV748X_IO_10_CSI4_EN;
> >
> > if (is_txa(state->afe.tx))
> > bits |= ADV748X_IO_10_CSI4_IN_SEL_AFE
> > else
> > bits |= ADV748X_IO_10_CSI1_EN;
> > }
> >
> > if (state->hdmi.tx) {
> > bits |= ADV748X_IO_10_CSI4_EN;
> > }
> >
> > return io_clrset(state, ADV748X_IO_10, mask, bits);
> > }
> >
> > How does that look ? (is it even correct first?)
> >
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct media_entity_operations adv748x_tx_media_ops = {
> > > + .link_setup = adv748x_link_setup,
> > > + .link_validate = v4l2_subdev_link_validate,
> > > +};
> > >
> > > static const struct media_entity_operations adv748x_media_ops = {
> > > .link_validate = v4l2_subdev_link_validate,
> > > @@ -516,7 +570,8 @@ void adv748x_subdev_init(struct v4l2_subdev *sd,
> > > struct adv748x_state *state,
> > > state->client->addr, ident);
> > >
> > > sd->entity.function = function;
> > > - sd->entity.ops = &adv748x_media_ops;
> > > + sd->entity.ops = is_tx(adv748x_sd_to_csi2(sd)) ?
> > > + &adv748x_tx_media_ops : &adv748x_media_ops;
> >
> > Aha - yes that's a neat solution to ensure that only the TX links
> > generate link_setup calls :)
>
> Another option would be to bail out from adv748x_link_setup() if the entity is
> not a TX*.
>
If I'm not wrong you suggested me to register a set of operations with
the .link_setup callback only for TX entities, and I agree it is much
better, so I'm leaning to leave it as it is in this series.
Thanks
j
> > > }
>
> [snip]
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>
Attachment:
signature.asc
Description: PGP signature
