Hello, second iteration for adv748x dynamic selection of video source. Please refer to v1 cover letter for more details: https://patchwork.kernel.org/cover/10723971/ This v2 addresses comments received from Kieran and Laurent, with the most notable changes in patches 3/6 and 6/6. Tested on R-Car E3 Ebisu board, where both AFE and HDMI backends share a single CSI-2 output. A noted on v1 cover letter, for the series to work on other R-Car SoC the number of CSI-2 data lanes has to be negotiated, as the AFE->TXA link works only when up to 2 data lanes are used, while most of Gen 3 SoCs (E3 excluded) are configured to use 4 data lanes. The series is based on media tree master with the following series from Niklas applied on top: [PATCH v4 0/4] i2c: adv748x: add support for CSI-2 TXA to work in 1-, 2- and 4-lane mode Branch available for testing at: git://jmondi.org/linux adv748x_dynamic-routing_v2 Thanks j Jacopo Mondi (6): media: adv748x: Add is_txb() media: adv748x: Rename reset procedures media: adv748x: csi2: Link AFE with TXA and TXB media: adv748x: Store the source subdevice in TX media: adv748x: Store the TX sink in HDMI/AFE media: adv748x: Implement TX link_setup callback drivers/media/i2c/adv748x/adv748x-afe.c | 2 +- drivers/media/i2c/adv748x/adv748x-core.c | 83 +++++++++++++++++++----- drivers/media/i2c/adv748x/adv748x-csi2.c | 65 ++++++++++++------- drivers/media/i2c/adv748x/adv748x-hdmi.c | 2 +- drivers/media/i2c/adv748x/adv748x.h | 13 +++- 5 files changed, 124 insertions(+), 41 deletions(-) -- 2.20.1
