Hi Kieran,
On Mon, Jan 07, 2019 at 09:49:25AM +0000, Kieran Bingham wrote:
> Hi Jacopo
>
> On 06/01/2019 15:54, Jacopo Mondi wrote:
> > Add small is_txb() macro to the existing is_txa() and use it where
> > appropriate.
>
> Thank you.
>
> I think this will make the code much better to read than if (!is_txa).
>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
>
> > ---
> > drivers/media/i2c/adv748x/adv748x-csi2.c | 2 +-
> > drivers/media/i2c/adv748x/adv748x.h | 6 +++++-
> > 2 files changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > index 6ce21542ed48..b6b5d8c7ea7c 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > @@ -82,7 +82,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
> > return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> > &state->hdmi.sd,
> > ADV748X_HDMI_SOURCE);
> > - if (!is_txa(tx) && is_afe_enabled(state))
> > + if (is_txb(tx) && is_afe_enabled(state))
> > return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> > &state->afe.sd,
> > ADV748X_AFE_SOURCE);
> > diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> > index b482c7fe6957..bc2da1b5ce29 100644
> > --- a/drivers/media/i2c/adv748x/adv748x.h
> > +++ b/drivers/media/i2c/adv748x/adv748x.h
> > @@ -89,8 +89,12 @@ struct adv748x_csi2 {
> >
> > #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
> > #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
> > +
> > #define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
> > -#define is_txa(_tx) ((_tx) == &(_tx)->state->txa)
> > +#define __is_tx(_tx, _ab) ((_tx) == &(_tx)->state->tx##_ab)
> > +#define is_txa(_tx) __is_tx(_tx, a)
> > +#define is_txb(_tx) __is_tx(_tx, b)
>
> I would have just duplicated the is_txa() line here... but this is good
> too :)
I agree it might seem more complex than necessary. I initially made it
like this as I started from the 'is_tx()' macro this series adds in
6/6.
If it is easier to have an '((_tx) == &(_tx)->state->txb)' I can
change this.
Thanks
j
>
>
> > +
> > #define is_afe_enabled(_state) \
> > ((_state)->endpoints[ADV748X_PORT_AIN0] != NULL || \
> > (_state)->endpoints[ADV748X_PORT_AIN1] != NULL || \
> >
>
> --
> Regards
> --
> Kieran
Attachment:
signature.asc
Description: PGP signature
