This patch modifies rcar_gen3_init_otg() procedure to follow Figure 73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- This patch is based on the latest linux-phy / next branch (commit id = 0eb86fa77f0f0c81631a030f10679a45c05df33a). drivers/phy/renesas/phy-rcar-gen3-usb2.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index d0f412c..a9e53e8 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) void __iomem *usb2_base = ch->base; u32 val; + rcar_gen3_set_linectrl(ch, 0, 1); + val = readl(usb2_base + USB2_LINECTRL1); + writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN, + usb2_base + USB2_LINECTRL1); + val = readl(usb2_base + USB2_VBCTRL); writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); - writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); - rcar_gen3_control_otg_irq(ch, 1); val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); - val = readl(usb2_base + USB2_LINECTRL1); - rcar_gen3_set_linectrl(ch, 0, 0); - writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN, - usb2_base + USB2_LINECTRL1); + + msleep(20); + + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); + + rcar_gen3_control_otg_irq(ch, 1); rcar_gen3_device_recognition(ch); } -- 1.9.1
