Hi Shimoda-San,
Thanks for the feedback.
Regards,
Biju
> -----Original Message-----
> From: Yoshihiro Shimoda
> Sent: 29 October 2018 08:42
> To: Biju Das <biju.das@xxxxxxxxxxxxxx>; Rob Herring
> <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Biju Das <biju.das@xxxxxxxxxxxxxx>; Simon Horman
> <horms@xxxxxxxxxxxx>; Magnus Damm <magnus.damm@xxxxxxxxx>;
> linux-renesas-soc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Geert
> Uytterhoeven <geert+renesas@xxxxxxxxx>; Chris Paterson
> <Chris.Paterson2@xxxxxxxxxxx>; Fabrizio Castro
> <fabrizio.castro@xxxxxxxxxxxxxx>
> Subject: RE: [PATCH 3/7] ARM: dts: r8a77470: Add USB PHY DT support
>
> Hi Biju-san,
>
> > From: Biju Das, Sent: Thursday, October 25, 2018 10:57 PM
> >
> > Define the r8a77470 generic part of the USB PHY device node.
> >
> > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > ---
> > This patch is tested against renesas-devel
>
> Thank you for the patch!
>
> <snip>
> > +usbphy1: usb-phy@e6598100 {
> > +compatible = "renesas,usb-phy-r8a77470",
> > + "renesas,rcar-gen2-usb-phy";
> > +reg = <0 0xe6598100 0 0x100>,
> > + <0 0xee0c0200 0 0x118>;
> > +#address-cells = <1>;
> > +#size-cells = <0>;
> > +clocks = <&cpg CPG_MOD 706>, <&cpg CPG_MOD
> 705>;
> > +clock-names = "usbhs", "usb20_host";
> > +status = "disabled";
'status = "disabled"'.
> > +resets = <&cpg 706>, <&cpg 705>;
> > +power-domains = <&sysc
> R8A77470_PD_ALWAYS_ON>;
> > +
> > +usb1: usb-channel@0 {
> > +reg = <0>;
> > +#phy-cells = <1>;
> > +};
> > +};
>
> I think this usbphy1 has to have 'status = "disabled"'.
It is already disabled please see above.
Regards,
Biju
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
