Hi Ulf,
On Tue, Oct 23, 2018 at 5:02 PM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> On 12 October 2018 at 14:29, Chris Brandt <chris.brandt@xxxxxxxxxxx> wrote:
> > Basically the same HW block that was used in R-Car Gen 3 is used in
> > RZ/A2 (with only a couple small differences).
> >
> > Not sure if you're going to like the Kconfig change or not.
> >
> > Chris Brandt (3):
> > clk: renesas: r7s9210: Add SDHI clocks
> > mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
> > dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
> >
> > Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 3 ++-
> > drivers/clk/renesas/r7s9210-cpg-mssr.c | 5 ++++
> > drivers/mmc/host/Kconfig | 5 ++--
> > drivers/mmc/host/renesas_sdhi_internal_dmac.c | 28 ++++++++++++++++++++--
> > 4 files changed, 36 insertions(+), 5 deletions(-)
> >
> > --
> > 2.16.1
>
> This looks good to me. So unless someone objects I intend to queue
> this up for 4.21, once 4.20 rc1 is out. Or perhaps the clock patch
> should go via the clock tree?
Correct. Please do not take the clock patch.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
