Re: [PATCH] arm64: dts: renesas: r8a779{7|8}0: add TMU support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!

On 09/11/2018 04:36 PM, Simon Horman wrote:

>>>> Describe TMUs in the R8A779{7|8}0 device trees.
>>>>
>>>> Based on the original (and large) patches by Vladimir Barinov.
>>>>
>>>> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
>>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>>>>
>>>> ---
>>>> This patch is against the 'renesas-devel-20180906-v4.19-rc2' branch of
>>>> Simon Horman's 'renesas.git' repo plus the R8A779{7|8}0 DT patch adding
>>>> the CMT support).
>>>>
>>>> The R8A779{7|8}0 TMU DT binding update have been just posted...
>>>>
>>>>  arch/arm64/boot/dts/renesas/r8a77970.dtsi |   66 ++++++++++++++++++++++++++++++
>>>>  arch/arm64/boot/dts/renesas/r8a77980.dtsi |   66 ++++++++++++++++++++++++++++++
>>>>  2 files changed, 132 insertions(+)
>>>>
>>>> Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>> ===================================================================
>>>> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>> +++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>> @@ -316,6 +316,72 @@
>>>>  			resets = <&cpg 407>;
>>>>  		};
>>>>  
>>>> +		tmu0: timer@e61e0000 {
>>>> +			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
>>>> +			reg = <0 0xe61e0000 0 0x30>;
>>>> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			clocks = <&cpg CPG_MOD 125>;
>>>> +			clock-names = "fck";
>>>> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>> +			resets = <&cpg 125>;
>>>> +			status = "disabled";
>>>> +		};
>>>> +
>>>> +		tmu1: timer@e6fc0000 {
>>>> +			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
>>>> +			reg = <0 0xe6fc0000 0 0x30>;
>>>> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			clocks = <&cpg CPG_MOD 124>;
>>>> +			clock-names = "fck";
>>>> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>> +			resets = <&cpg 124>;
>>>> +			status = "disabled";
>>>> +		};
>>>> +
>>>> +		tmu2: timer@e6fd0000 {
>>>> +			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
>>>> +			reg = <0 0xe6fd0000 0 0x30>;
>>>> +			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
>>>
>>> Should GIC_SPI 306 also be here for TMU 2 channel 3?> 
>>> And likewise for the r8a77980 (V3H)
>>
>>    There are only 3 channels per TMU according to the beginning of the TMU chapter.
>>
>>> The documentation seems inconsistent as I see this listed in the
>>> interrupt controller documentation. But I do not see that channel
>>> documented in the TMU documentation.
>>
>>    Right!
>>
>>>> +			clocks = <&cpg CPG_MOD 123>;
>>>> +			clock-names = "fck";
>>>> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>> +			resets = <&cpg 123>;
>>>> +			status = "disabled";
>>>> +		};
>>>> +
>>>> +		tmu3: timer@e6fe0000 {
>>>> +			compatible = "renesas,tmu-r8a7797", "renesas,tmu";
>>>> +			reg = <0 0xe6fe0000 0 0x30>;
>>>> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>>>> +			clocks = <&cpg CPG_MOD 122>;
>>>> +			clock-names = "fck";
>>>> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>> +			resets = <&cpg 122>;
>>>> +			status = "disabled";
>>>> +		};
>>>> +
>>>> +		tmu4: timer@ffc00000 {
>>>> +			compatible = "renesas,tmu-r8a7797", "renesas,tmu";
>>>> +			reg = <0 0xffc00000 0 0x30>;
>>>> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>> +				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
>>>
>>> Should GIC_SPI 369 for TMU 4 channel 3 be present not here for
>>> the r8a77970 (V3M) but rather below for the r8a77980 (V3H) ?
>>
>>    I don't think it should be pesent in either place, and I thought I had removed
>> the 4th IRQ from every node before posting... :-/
>>
>>> As per my note above, the documentation seems inconsistent here.
>>
>>    Yes.
> 
> Lets go with no 4th IRQ anywhere :)

   After having studied the manual, 4th IRQ might have sometging to do with the input capture channel capability which uses an extra IRQ output.

> Could you send an updated patch?

   Sure. I'll verify and repost.

[...]

MBR, Sergei



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux