Re: [PATCH 3/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fabrizio,

On Thu, Aug 23, 2018 at 3:08 PM Fabrizio Castro
<fabrizio.castro@xxxxxxxxxxxxxx> wrote:>
> Document RZ/G2M (r8a774a1) SoC specific bindings and RZ/G2
> generic bindings.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> Signed-off-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
>  Required properties:
>  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
>               "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> +             "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.

Looks good to me.

>               "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
>               "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
>               "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> @@ -17,6 +18,7 @@ Required properties:
>               "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
>               compatible device.
>               "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> +             "renesas,rzg-gen2-can" for a generic RZ/G2 compatible device.

AFAIK, the actual CAN module in RZ/G2M is fully compatible with the CAN
module in R-Car Gen3 SoCs. The lack of clkp2 is merely an integration
difference: as RZ/G2 SoCs do not have the CANFD module, and their CPG block
doesn't provide the CANFD clock (so the CAN device node in DT cannot refer
to that clock anyway).

Hence I don't think there's a need to introduce a "renesas,rzg-gen2-can"
compatible value.

>               When compatible with the generic version, nodes must list the
>               SoC-specific version corresponding to the platform first
>               followed by the generic version.
> @@ -24,7 +26,9 @@ Required properties:
>  - reg: physical base address and size of the R-Car CAN register map.
>  - interrupts: interrupt specifier for the sole interrupt.
>  - clocks: phandles and clock specifiers for 3 CAN clock inputs.

You still have "3" here. Perhaps
"Must contain a phandle and clock-specifier pair for each entry in
clock-names."?

> -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> +              3 clock input name strings for every other SoC: "clkp1", "clkp2",
> +              "can_clk".

OK.

> @@ -41,8 +45,9 @@ using the below properties:
>  Optional properties:
>  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
>                             <0x0> (default) : Peripheral clock (clkp1)
> -                           <0x1> : Peripheral clock (clkp2)
> -                           <0x3> : Externally input clock
> +                           <0x1> : Peripheral clock (clkp2) (not supported by
> +                                   RZ/G2 devices)
> +                           <0x3> : External input clock

I already expressed my feelings about this property in my reply to the first
patch ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux