Hejssan! On Thu, Aug 23, 2018 at 03:25:14PM +0200, Niklas Söderlund wrote: > Hi all, > > This series adds support for multiplexed streams within a media device > link. The use-case addressed in this series covers CSI-2 Virtual > Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been > a joint effort between Sakari and Laurent and floating around for some > time [1]. Thanks for working on driver support for this. How do you handle streaming on R-Car Gen2 CSI-2 receiver? Do you support multiple concurrent such streams? > > I have added driver support for the devices used on the Renesas Gen3 > platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these > changes I can control which of the analog inputs of the ADV7482 the > video source is captured from and on which CSI-2 virtual channel the > video is transmitted on to the R-Car CSI-2 receiver. > > The series adds two new subdev IOCTLs [GS]_ROUTING which allows > user-space to get and set routes inside a subdevice. I have added RFC > support for these to v4l-utils [2] which can be used to test this > series, example: > > Check the internal routing of the adv748x csi-2 transmitter: > v4l2-ctl -d /dev/v4l-subdev24 --get-routing > 0/0 -> 1/0 [ENABLED] > 0/0 -> 1/1 [] > 0/0 -> 1/2 [] > 0/0 -> 1/3 [] > > > Select that video should be outputed on VC 2 and check the result: > $ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]' Do you have the v4l2-ctl changes for routing configuration? I do have similar changes for media-ctl (as well as libv4l2subdev) but I don't think I've posted them yet. This patchset doesn't depend on them though. > > $ v4l2-ctl -d /dev/v4l-subdev24 --get-routing > 0/0 -> 1/0 [] > 0/0 -> 1/1 [] > 0/0 -> 1/2 [ENABLED] > 0/0 -> 1/3 [] > > This series is tested on R-Car M3-N and for your testing needs this > series is available at > > git://git.ragnatech.se/linux v4l2/mux > > Thanks. > > 1. git://linuxtv.org/sailus/media_tree.git vc > 2. git://git.ragnatech.se/v4l-utils routing > > > Laurent Pinchart (4): > media: entity: Add has_route entity operation > media: entity: Add media_has_route() function > media: entity: Use routing information during graph traversal > v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations > > Niklas Söderlund (7): > adv748x: csi2: add translation from pixelcode to CSI-2 datatype > adv748x: csi2: only allow formats on sink pads > adv748x: csi2: describe the multiplexed stream > adv748x: csi2: add internal routing configuration > adv748x: afe: add routing support > rcar-csi2: use frame description information to configure CSI-2 bus > rcar-csi2: expose the subdevice internal routing > > Sakari Ailus (19): > media: entity: Use pad as a starting point for graph walk > media: entity: Use pads instead of entities in the media graph walk > stack > media: entity: Walk the graph based on pads > v4l: mc: Start walk from a specific pad in use count calculation > media: entity: Move the pipeline from entity to pads > media: entity: Use pad as the starting point for a pipeline > media: entity: Swap pads if route is checked from source to sink > media: entity: Skip link validation for pads to which there is no > route to > media: entity: Add an iterator helper for connected pads > media: entity: Add only connected pads to the pipeline > media: entity: Add debug information in graph walk route check > media: entity: Look for indirect routes > v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING > v4l: subdev: Take routing information into account in link validation > v4l: subdev: Improve link format validation debug messages > v4l: mc: Add an S_ROUTING helper function for power state changes > v4l: Add bus type to frame descriptors > v4l: Add CSI-2 bus configuration to frame descriptors > v4l: Add stream to frame descriptor > > Documentation/media/kapi/mc-core.rst | 15 +- > drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++ > drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++- > drivers/media/i2c/adv748x/adv748x.h | 1 + > drivers/media/media-entity.c | 252 ++++++++++------ > drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +- > .../media/platform/exynos4-is/fimc-capture.c | 8 +- > .../platform/exynos4-is/fimc-isp-video.c | 8 +- > drivers/media/platform/exynos4-is/fimc-isp.c | 2 +- > drivers/media/platform/exynos4-is/fimc-lite.c | 10 +- > drivers/media/platform/exynos4-is/media-dev.c | 20 +- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispvideo.c | 25 +- > drivers/media/platform/omap3isp/ispvideo.h | 2 +- > .../media/platform/qcom/camss/camss-video.c | 6 +- > drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++--- > drivers/media/platform/rcar-vin/rcar-dma.c | 8 +- > .../media/platform/s3c-camif/camif-capture.c | 6 +- > drivers/media/platform/vimc/vimc-capture.c | 6 +- > drivers/media/platform/vsp1/vsp1_video.c | 18 +- > drivers/media/platform/xilinx/xilinx-dma.c | 20 +- > drivers/media/platform/xilinx/xilinx-dma.h | 2 +- > drivers/media/usb/au0828/au0828-core.c | 4 +- > drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++ > drivers/media/v4l2-core/v4l2-ioctl.c | 20 +- > drivers/media/v4l2-core/v4l2-mc.c | 76 +++-- > drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++-- > .../staging/media/davinci_vpfe/vpfe_video.c | 47 +-- > drivers/staging/media/imx/imx-media-utils.c | 8 +- > drivers/staging/media/omap4iss/iss.c | 2 +- > drivers/staging/media/omap4iss/iss_video.c | 38 +-- > drivers/staging/media/omap4iss/iss_video.h | 2 +- > include/media/media-entity.h | 122 +++++--- > include/media/v4l2-mc.h | 22 ++ > include/media/v4l2-subdev.h | 34 +++ > include/uapi/linux/v4l2-subdev.h | 40 +++ > 36 files changed, 1239 insertions(+), 330 deletions(-) > -- Trevliga hälsningar, Sakari Ailus e-mail: sakari.ailus@xxxxxx
