Hi all,
This series adds support for multiplexed streams within a media device
link. The use-case addressed in this series covers CSI-2 Virtual
Channels on the Renesas R-Car Gen3 platforms. The v4l2 changes have been
a joint effort between Sakari and Laurent and floating around for some
time [1].
I have added driver support for the devices used on the Renesas Gen3
platforms, a ADV7482 connected to the R-Car CSI-2 receiver. With these
changes I can control which of the analog inputs of the ADV7482 the
video source is captured from and on which CSI-2 virtual channel the
video is transmitted on to the R-Car CSI-2 receiver.
The series adds two new subdev IOCTLs [GS]_ROUTING which allows
user-space to get and set routes inside a subdevice. I have added RFC
support for these to v4l-utils [2] which can be used to test this
series, example:
Check the internal routing of the adv748x csi-2 transmitter:
v4l2-ctl -d /dev/v4l-subdev24 --get-routing
0/0 -> 1/0 [ENABLED]
0/0 -> 1/1 []
0/0 -> 1/2 []
0/0 -> 1/3 []
Select that video should be outputed on VC 2 and check the result:
$ v4l2-ctl -d /dev/v4l-subdev24 --set-routing '0/0 -> 1/2 [1]'
$ v4l2-ctl -d /dev/v4l-subdev24 --get-routing
0/0 -> 1/0 []
0/0 -> 1/1 []
0/0 -> 1/2 [ENABLED]
0/0 -> 1/3 []
This series is tested on R-Car M3-N and for your testing needs this
series is available at
git://git.ragnatech.se/linux v4l2/mux
Thanks.
1. git://linuxtv.org/sailus/media_tree.git vc
2. git://git.ragnatech.se/v4l-utils routing
Laurent Pinchart (4):
media: entity: Add has_route entity operation
media: entity: Add media_has_route() function
media: entity: Use routing information during graph traversal
v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations
Niklas Söderlund (7):
adv748x: csi2: add translation from pixelcode to CSI-2 datatype
adv748x: csi2: only allow formats on sink pads
adv748x: csi2: describe the multiplexed stream
adv748x: csi2: add internal routing configuration
adv748x: afe: add routing support
rcar-csi2: use frame description information to configure CSI-2 bus
rcar-csi2: expose the subdevice internal routing
Sakari Ailus (19):
media: entity: Use pad as a starting point for graph walk
media: entity: Use pads instead of entities in the media graph walk
stack
media: entity: Walk the graph based on pads
v4l: mc: Start walk from a specific pad in use count calculation
media: entity: Move the pipeline from entity to pads
media: entity: Use pad as the starting point for a pipeline
media: entity: Swap pads if route is checked from source to sink
media: entity: Skip link validation for pads to which there is no
route to
media: entity: Add an iterator helper for connected pads
media: entity: Add only connected pads to the pipeline
media: entity: Add debug information in graph walk route check
media: entity: Look for indirect routes
v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING
v4l: subdev: Take routing information into account in link validation
v4l: subdev: Improve link format validation debug messages
v4l: mc: Add an S_ROUTING helper function for power state changes
v4l: Add bus type to frame descriptors
v4l: Add CSI-2 bus configuration to frame descriptors
v4l: Add stream to frame descriptor
Documentation/media/kapi/mc-core.rst | 15 +-
drivers/media/i2c/adv748x/adv748x-afe.c | 65 ++++
drivers/media/i2c/adv748x/adv748x-csi2.c | 124 +++++++-
drivers/media/i2c/adv748x/adv748x.h | 1 +
drivers/media/media-entity.c | 252 ++++++++++------
drivers/media/pci/intel/ipu3/ipu3-cio2.c | 6 +-
.../media/platform/exynos4-is/fimc-capture.c | 8 +-
.../platform/exynos4-is/fimc-isp-video.c | 8 +-
drivers/media/platform/exynos4-is/fimc-isp.c | 2 +-
drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
drivers/media/platform/exynos4-is/media-dev.c | 20 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/platform/omap3isp/ispvideo.c | 25 +-
drivers/media/platform/omap3isp/ispvideo.h | 2 +-
.../media/platform/qcom/camss/camss-video.c | 6 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 188 +++++++++---
drivers/media/platform/rcar-vin/rcar-dma.c | 8 +-
.../media/platform/s3c-camif/camif-capture.c | 6 +-
drivers/media/platform/vimc/vimc-capture.c | 6 +-
drivers/media/platform/vsp1/vsp1_video.c | 18 +-
drivers/media/platform/xilinx/xilinx-dma.c | 20 +-
drivers/media/platform/xilinx/xilinx-dma.h | 2 +-
drivers/media/usb/au0828/au0828-core.c | 4 +-
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 75 +++++
drivers/media/v4l2-core/v4l2-ioctl.c | 20 +-
drivers/media/v4l2-core/v4l2-mc.c | 76 +++--
drivers/media/v4l2-core/v4l2-subdev.c | 285 ++++++++++++++++--
.../staging/media/davinci_vpfe/vpfe_video.c | 47 +--
drivers/staging/media/imx/imx-media-utils.c | 8 +-
drivers/staging/media/omap4iss/iss.c | 2 +-
drivers/staging/media/omap4iss/iss_video.c | 38 +--
drivers/staging/media/omap4iss/iss_video.h | 2 +-
include/media/media-entity.h | 122 +++++---
include/media/v4l2-mc.h | 22 ++
include/media/v4l2-subdev.h | 34 +++
include/uapi/linux/v4l2-subdev.h | 40 +++
36 files changed, 1239 insertions(+), 330 deletions(-)
--
2.18.0
