Hi Ulrich, Thank you for the patches. On Tuesday, 14 August 2018 16:49:54 EEST Ulrich Hecht wrote: > Hi! > > This is a prototype extension of the series "R-Car D3 LVDS/HDMI support" > that includes an up-port of the LVDS PLL support in the BSP. > > While this is prototype-quality code, there are in my judgment no serious > hacks in it. The most significant deviation in behavior between this and > the BSP code is that the LVDS PLL setup is not done in two steps, but in one > go as the LVDS device is enabled. This was easier to implement, and works > just as fine. > > Instructions for testing this are found at > https://elinux.org/User:Uli/D3_HDMI_Test, including links to git trees based > on renesas-drivers and drm-next, as well as config files for each. The instructions there end with "4. Boot kernel and observe activity on HDMI display." Does "activity" mean that I can expect a working HDMI output with a proper image on the display ? :-) -- Regards, Laurent Pinchart
