Hi Eugeniu Thank you for the patch. On 12/08/18 14:31, Eugeniu Rosca wrote: > Document the support for rcar_can on R8A77965 SoC devices. > Add R8A77965 to the list of SoCs which require the "assigned-clocks" and > "assigned-clock-rates" properties (thanks, Sergei). Rewrap text. I don't think you needed to say you rewrapped the text in the commit log - but it's fine :) > Signed-off-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > --- > Changes in v2: > - [Kieran Bingham] Simplified commit description. Rewrapped text. > - [Sergei Shtylyov] Replaced footnotes with inline text. > - Pushed all dt-bindings patches to the beginning of the series. > --- > Documentation/devicetree/bindings/net/can/rcar_can.txt | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt > index 94a7f33ac5e9..60daa878c9a2 100644 > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt > @@ -13,6 +13,7 @@ Required properties: > "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. > "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. > "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. > + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. > "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 > compatible device. > @@ -28,11 +29,10 @@ Required properties: > - pinctrl-0: pin control group to be used for this controller. > - pinctrl-names: must be "default". > > -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" > -compatible: > -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock > -and can be used by both CAN and CAN FD controller at the same time. It needs to > -be scaled to maximum frequency if any of these controllers use it. This is done > +Required properties for R8A7795, R8A7796 and R8A77965: > +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can > +be used by both CAN and CAN FD controller at the same time. It needs to be > +scaled to maximum frequency if any of these controllers use it. This is done > using the below properties: > > - assigned-clocks: phandle of clkp2(CANFD) clock. >
