Add the nodes to enable SATA. Note that MD12 (SW12-7) must be switched
off for that to work.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index 8ded64d0a4d5..3032bdb8c47d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -152,6 +152,15 @@
};
};
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
@@ -176,6 +185,11 @@
};
};
+ /* MD12 (SW12-7) must be set 'Off' which is not the default! */
+&sata {
+ status = "okay";
+};
+
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
--
2.11.0
