On 07/20/2018 06:38 PM, Sergei Shtylyov wrote:
> On 07/20/2018 03:05 PM, Simon Horman wrote:
>
>> From: Marek Vasut <marek.vasut@xxxxxxxxx>
>>
>> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
>> one DA9063L and one DA9210 on Porter, the only difference from
>> the other boards is that DA9063L is at I2C address 0x5a rather
>> than 0x58 .
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/r8a7791-porter.dts | 33 +++++++++++++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
>> index a01101b49d99..5f77d73d7462 100644
>> --- a/arch/arm/boot/dts/r8a7791-porter.dts
>> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
>> @@ -375,10 +375,43 @@
>> clock-frequency = <400000>;
>> };
>>
>> +&i2c6 {
>> + status = "okay";
>> + clock-frequency = <100000>;
>> +
>> + pmic@5a {
>> + compatible = "dlg,da9063l";
>> + reg = <0x5a>;
>> + interrupt-parent = <&irqc0>;
>> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-controller;
>
> Without a label and #interrupt-cells?
Just like the other boards do. What's the problem here ?
--
Best regards,
Marek Vasut
