On 07/20/2018 03:05 PM, Simon Horman wrote:
> From: Marek Vasut <marek.vasut@xxxxxxxxx>
>
> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> one DA9063L and one DA9210 on Porter, the only difference from
> the other boards is that DA9063L is at I2C address 0x5a rather
> than 0x58 .
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7791-porter.dts | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
> index a01101b49d99..5f77d73d7462 100644
> --- a/arch/arm/boot/dts/r8a7791-porter.dts
> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> @@ -375,10 +375,43 @@
> clock-frequency = <400000>;
> };
>
> +&i2c6 {
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + pmic@5a {
> + compatible = "dlg,da9063l";
> + reg = <0x5a>;
> + interrupt-parent = <&irqc0>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
Without a label and #interrupt-cells?
> +
> + wdt {
> + compatible = "dlg,da9063-watchdog";
> + };
> + };
[...]
MBR, Sergei
