The data link active signal usually takes ~20 uSec to be asserted,
poll the bit more often to avoid useless delays in this function.
Use udelay() instead of usleep() for such a small delay as suggested
by the timer documentation and because this will be used in atomic
context later on when the suspend/resume patches land.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
V2: s/content/context in commit message
V3: Add cpu_relax()
V4: Rebase on top of Lorenzo's pci/rcar, fix up the rebase breakage
induced by patches therein
---
drivers/pci/host/pcie-rcar.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index d6a7e8482dcf..4843a4dc6059 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -546,13 +546,14 @@ static int rcar_pcie_wait_for_phyrdy(struct rcar_pcie *pcie)
static int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie)
{
- unsigned int timeout = 10;
+ unsigned int timeout = 10000;
while (timeout--) {
if ((rcar_pci_read_reg(pcie, PCIETSTR) & DATA_LINK_ACTIVE))
return 0;
- msleep(5);
+ udelay(5);
+ cpu_relax();
}
return -ETIMEDOUT;
--
2.16.2
