The DU1 external dot clock is provided by the fixed frequency clock
generator X21, while the DU0 and DU3 clocks are provided by the
programmable Versaclock6 clock generator.
Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and
hook it up to the HDMI connector
Based on patches from Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
.../boot/dts/renesas/r8a77965-salvator-xs.dts | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
index a83a00deed9e..dcf1849f1a67 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -19,3 +19,32 @@
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock6 1>,
+ <&x21_clk>,
+ <&versaclock6 2>;
+ clock-names = "du.0", "du.1", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
--
2.17.0
