On Fri, Apr 20, 2018 at 09:51:06PM +0300, Sergei Shtylyov wrote:
> On 04/20/2018 01:03 PM, Simon Horman wrote:
>
> >> Define the Condor board dependent part of the MMC0 (connected to eMMC chip)
> >> device node along with the necessary voltage regulators...
> >>
> >> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> >>
> >> ---
> >> arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 43 ++++++++++++++++++++++++
> >> 1 file changed, 43 insertions(+)
> >>
> >> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> ===================================================================
> >> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> >> @@ -27,6 +27,24 @@
> >> /* first 128MB is reserved for secure area. */
> >> reg = <0 0x48000000 0 0x78000000>;
> >> };
> >> +
> >> + d3_3v: regulator-0 {
> >
> > Please use reg_3p3v: regulator1 for consistency with salvator-common.dtsi
>
> Hm, not sure why I have to copy what I consider a bad example... the SoCs are
> not pin compatible anyway.
>
> >> + compatible = "regulator-fixed";
> >> + regulator-name = "D3.3V";
> >
> > And "fixed-3.3V"
>
> Ugh. That's pretty poor name I think. My names do correspond to the schematics
> and these only muddle things up, I think...
>
> [...]
> >> @@ -70,6 +101,18 @@
> >> function = "avb";
> >> };
> >>
> >> + mmc_1_8v_pins: mmc_1_8v {
> >> + groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
> >> + function = "mmc";
> >> + power-source = <1800>;
> >> + };
> >> +
> >> + mmc_3_3v_pins: mmc_3_3v {
> >> + groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
> >> + function = "mmc";
> >> + power-source = <3300>;
> >> + };
> >
> > Again please make this more consistent with salvator-common.dtsi.
>
> Ah, you mean the _uhs label name postfix? OK...
Thanks, could you send a v2?
