On 18.04.2018 16:40, Jacopo Mondi wrote: > As I have another series which is based on this one + Eagle board display > support, I'm re-sending this one to fix the small issue I pointed out in my > reply to v8. > > Simon: no changes to Eagle DTS series, so the last one sent is still the good > one. > > DRM: I have collected several reviewed-by tags both on driver and bindings. > Can I send out incremental patches on this series and consider this one to > be ready to be collected? Queued to drm-misc-next. Regards Andrzej > > Thanks > j > > v8 -> v9: > - Put 'remote' OF node after usage not just in error path during device > tree parsing routine > - Add Rob's Reviewed-by tag to the device tree bindings documentation > > v7 -> b8: > - Make 'vcc' supply mandatory > - Use 'oe' property name to describe "OE" pin > - Minor fixes as suggested by Laurent on bindings and driver > > v6 -> v7: > - Use semi-standard names for powerdown and output enable GPIOs as suggested > by Rob and Vladimir > - Use 'regulator_get()' not the optional version, and list only 'vcc' as > requested supply > - Addressed Laurent's review comments and removed Eagle display enablement patch > to be sent separately > > v5 -> v6: > - Drop check for CONFIG_OF as it is a Kconfig dependency > - Add Niklas Reviewed-by tags > - List [3/3] depenencies below commit message to ease integration > > v4 -> v5: > - Fix punctuation in bindings documentation > - Add small statement to bindings document to clarify the chip has no > control bus > - Print regulator name in enable/disable routines error path > - Add Andrzej Reviewed-by tag > > v3 -> v4: > - Rename permutations of "pdwn" to just "pdwn" everywhere in the series > - Improve power enable/disable routines as suggested by Andrzej and Sergei > - Change "pdwn" gpio initialization to use the logical output level > - Change Kconfig description > > v2 -> v3: > - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific > -- Rework bindings to describe multiple input/output ports > -- Rename driver and remove "lvds-decoder" references > -- Rework Eagle DTS to use new bindings > > v1 -> v2: > - Drop support for THC63LVD1024 > > Jacopo Mondi (2): > dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder > drm: bridge: Add thc63lvd1024 LVDS decoder driver > > .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++ > drivers/gpu/drm/bridge/Kconfig | 6 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/thc63lvd1024.c | 205 +++++++++++++++++++++ > 4 files changed, 272 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt > create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c > > -- > 2.7.4 > > > >
