[PATCH v3 5/5] mmc: renesas_sdhi_internal_dmac: remove superfluous WARN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The WARN can never trigger because we limited the max_seg number in
renesas_sdhi_of_data already. Remove it and update the comment.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
 drivers/mmc/host/renesas_sdhi_internal_dmac.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 240e8a168aa1..2935dd9315d3 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -91,7 +91,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen3_compatible = {
 	.scc_offset	= 0x1000,
 	.taps		= rcar_gen3_scc_taps,
 	.taps_num	= ARRAY_SIZE(rcar_gen3_scc_taps),
-	/* Gen3 SDHI DMAC can handle 0xffffffff blk count, but seg = 1 */
+	/* DMAC can handle 0xffffffff blk count but only 1 segment */
 	.max_blk_count	= 0xffffffff,
 	.max_segs	= 1,
 };
@@ -158,9 +158,6 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host,
 	struct scatterlist *sg = host->sg_ptr;
 	u32 dtran_mode = DTRAN_MODE_BUS_WID_TH | DTRAN_MODE_ADDR_MODE;
 
-	/* This DMAC cannot handle if sg_len is not 1 */
-	WARN_ON(host->sg_len > 1);
-
 	if (!dma_map_sg(&host->pdev->dev, sg, host->sg_len,
 			mmc_get_dma_dir(data)))
 		goto force_pio;
-- 
2.11.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux