[PATCH v3 3/4] mfd: bd9571mwv: Allow DDR Backup Power register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable read/write access to the BD9571MWV_BKUP_MODE_CNT register, which
is amongst others used to configure DDR Backup Power.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>

v3:
  - No changes,

v2:
  - Expand "a.o.",
  - Add Acked-for-MFD-by.
---
 drivers/mfd/bd9571mwv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
index 64e088dfe7b05b5b..503979c81dae11bb 100644
--- a/drivers/mfd/bd9571mwv.c
+++ b/drivers/mfd/bd9571mwv.c
@@ -29,6 +29,7 @@ static const struct mfd_cell bd9571mwv_cells[] = {
 
 static const struct regmap_range bd9571mwv_readable_yes_ranges[] = {
 	regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+	regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
 	regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)),
 	regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID),
 	regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT),
@@ -44,6 +45,7 @@ static const struct regmap_access_table bd9571mwv_readable_table = {
 };
 
 static const struct regmap_range bd9571mwv_writable_yes_ranges[] = {
+	regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
 	regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)),
 	regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
 	regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux