This patch set is based on v4.17-rc1. In last week, I submitted a patch as v1 [1]. But, the v1 patch doesn't use graphs to get usb host device pointer. So, I modified some frameworks for it. Since the patch 4 "of: platform: add device connection parsing" has TODOs, I marked this patch set as "RFC". Before I resolve them, I would like to know whether this way is good or not. [1] https://patchwork.kernel.org/patch/10332865/ Yoshihiro Shimoda (11): Documentation: of: Add device-connection-id property dt-bindings: usb: add usb role switch driver dt-bindings: usb: add Renesas R-Car USB 3.0 role switch driver of: platform: add device connection parsing usb: common: roles: add fwnode graph parsing usb: common: roles: Allow if the parent dev_name matches usb: common: roles: add getting device pointer APIs usb: role: rcar-usb3-role-switch: add support for R-Car SoCs usb: gadget: udc: renesas_usb3: add support for a usb role switch arm64: dts: renesas: r8a7795: add OF graph for usb role switch arm64: dts: renesas: r8a7795: salvator-xs: add OF graph for usb role switch Documentation/devicetree/bindings/graph.txt | 2 +- .../bindings/usb/renesas,rcar-usb3-role-sw.txt | 56 +++++++ .../devicetree/bindings/usb/usb-role-switch.txt | 42 +++++ .../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 28 ++++ arch/arm64/boot/dts/renesas/r8a7795.dtsi | 44 +++++ drivers/of/platform.c | 66 ++++++++ drivers/usb/common/roles.c | 84 +++++++++- drivers/usb/gadget/udc/Kconfig | 1 + drivers/usb/gadget/udc/renesas_usb3.c | 34 +++- drivers/usb/roles/Kconfig | 12 ++ drivers/usb/roles/Makefile | 1 + drivers/usb/roles/rcar-usb3-role-switch.c | 179 +++++++++++++++++++++ include/linux/of.h | 1 + include/linux/usb/role.h | 4 + 14 files changed, 545 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/renesas,rcar-usb3-role-sw.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-role-switch.txt create mode 100644 drivers/usb/roles/rcar-usb3-role-switch.c -- 1.9.1
