Add CCI-400 node and control-port on CPUs needed by SMP bringup. Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 7974eaba57a7..42539267e329 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -66,6 +66,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; reg = <0>; }; @@ -73,6 +74,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; reg = <1>; }; @@ -80,6 +82,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; reg = <2>; }; @@ -87,6 +90,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + cci-control-port = <&cci_control0>; reg = <3>; }; @@ -96,6 +100,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; reg = <0x100>; }; @@ -103,6 +108,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; reg = <0x101>; }; @@ -110,6 +116,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; reg = <0x102>; }; @@ -117,6 +124,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; operating-points-v2 = <&cpu1_opp_table>; + cci-control-port = <&cci_control1>; reg = <0x103>; }; }; @@ -354,6 +362,39 @@ reg = <0x01700000 0x400>; }; + cci@1790000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01790000 0x10000>; + ranges = <0x0 0x01790000 0x10000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; -- 2.11.0