Hello, this new version fixes comments received from Andrzej and Sergei on the preceding v3. Mostly, I cleaned up the mess with the powerdown GPIO names, and I'm now using pdwn everywhere. The regulator enabling routine has been improved as suggested by Sergei and Andrzej and I've changed Kconfig symbol documentation for consistency with other ones. Also, fix gpio initialization to comply with the APIs that work on logical level even at gpio request time. Branch for testing available at git://jmondi.org v3m/v4.16-rc3/lvds-bridge-v4 Thanks j v3 -> v4: - Rename permutations of "pdwn" to just "pdwn" everywhere in the series - Improve power enable/disable routines as suggested by Andrzej and Sergei - Change "pdwn" gpio initialization to use the logical output level - Change Kconfig description v2 -> v3: - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific -- Rework bindings to describe multiple input/output ports -- Rename driver and remove "lvds-decoder" references -- Rework Eagle DTS to use new bindings v1 -> v2: - Drop support for THC63LVD1024 Jacopo Mondi (3): dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder drm: bridge: Add thc63lvd1024 LVDS decoder driver arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle .../bindings/display/bridge/thine,thc63lvd1024.txt | 63 +++++ arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 33 ++- drivers/gpu/drm/bridge/Kconfig | 6 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/thc63lvd1024.c | 255 +++++++++++++++++++++ 5 files changed, 355 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c -- 2.7.4
