Hi Jacopo,
On 02/03/18 17:35, Jacopo Mondi wrote:
> Hello,
> now that CEU has been picked up for inclusion in v4.17, we can start moving
> users of old sh_mobile_ceu_camera driver to use the newly introduced one.
>
> Migo-R has been first, now it's SH7724 ECOVEC board turn.
>
> ECOVEC has a camera board with two MT9T112 image sensor and one TW9910 video
> decoder input. This series moves the mt9t112 driver away from soc_camera
> framework and remove dependencies on it in mach-ecovec board code.
>
> As per Migo-R, memory for CEU is reserved using memblocks APIs and declared
> as DMA-capable in board code, power up/down routines have been removed from
> board code, and GPIOs lookup table registered for sensor drivers.
>
> As in the previous series, still no code has been removed or changed in
> drivers/media/i2c/soc_camera/ until we do not remove all dependencies on it
> in all board files.
>
> Hans, since you asked me to add frame rate interval support for ov772x I expect
> to receive the same request for mt9t112. Unfortunately I do not have access to
> register level documentation, nor can perform any testing as I don't have the
> camera modules. For the same reason I cannot run any v4l2-compliance test on
> that driver, but just make sure the ECOVEC boots cleanly with the new board
> file. I'm in favour of moving the driver to staging if you think that's the case.
>
> Series based on media-tree master, and as per Migo-R I would ask SH arch/
> changes to go through media tree as SH maintainers are un-responsive.
When compiling this series I get this error:
drivers/media/i2c/soc_camera/mt9t112.c: In function ‘mt9t112_init_pll’:
drivers/media/i2c/soc_camera/mt9t112.c:426:16: error: dereferencing pointer to incomplete type ‘struct mt9t112_camera_info’
priv->info->divider.m,
^~
Can you take a look?
Regards,
Hans
>
> Thanks
> j
>
> Jacopo Mondi (5):
> media: i2c: Copy mt9t112 soc_camera sensor driver
> media: i2c: mt9t112: Remove soc_camera dependencies
> media: i2c: mt9t112: Fix code style issues
> arch: sh: ecovec: Use new renesas-ceu camera driver
> media: MAINTAINERS: Add entry for Aptina MT9T112
>
> MAINTAINERS | 7 +
> arch/sh/boards/mach-ecovec24/setup.c | 338 +++++-----
> arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 4 +-
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/mt9t112.c | 1136 ++++++++++++++++++++++++++++++++
> include/media/i2c/mt9t112.h | 17 +-
> 7 files changed, 1333 insertions(+), 181 deletions(-)
> create mode 100644 drivers/media/i2c/mt9t112.c
>
> --
> 2.7.4
>
