Re: [PATCH v2 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sergei,

On Fri, Mar 09, 2018 at 08:30:36PM +0300, Sergei Shtylyov wrote:
> On 03/09/2018 04:51 PM, Jacopo Mondi wrote:
>
> > The R-Car V3M Eagle board includes a transparent LVDS decoder, connected
> > to the on-chip LVDS encoder output on one side and to HDMI encoder
> > ADV7511w on the other one.
> >
> > As the decoder does not need any configuration it has been so-far
> > omitted from DTS. Now that a driver for transparent LVDS decoder is
> > available, describe it in DT as well.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 31 ++++++++++++++++++++++++--
> >  1 file changed, 29 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > index c0fd144..0a95c20 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > @@ -42,6 +42,33 @@
> >  			};
> >  		};
> >  	};
> > +
> > +	lvds,decoder {
>
>    I said hyphen (-), not comma (,)! :-)

Ahah ok, my bad, I somehow confused the two :)
It looked weird to me, but I thought you were pointing me to some
convention I didn't know about!

I'll change this in v3

Thanks
  j
>
> [...]
>
> MBR, Sergei



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux