On 07/03/18 23:05, Niklas Söderlund wrote:
> Add the ability to process media device link change requests. Link
> enabling is a bit complicated on Gen3, whether or not it's possible to
> enable a link depends on what other links already are enabled. On Gen3
> the 8 VINs are split into two subgroup's (VIN0-3 and VIN4-7) and from a
> routing perspective these two groups are independent of each other.
> Each subgroup's routing is controlled by the subgroup VIN master
> instance (VIN0 and VIN4).
>
> There are a limited number of possible route setups available for each
> subgroup and the configuration of each setup is dictated by the
> hardware. On H3 for example there are 6 possible route setups for each
> subgroup to choose from.
>
> This leads to the media device link notification code being rather large
> since it will find the best routing configuration to try and accommodate
> as many links as possible. When it's not possible to enable a new link
> due to hardware constrains the link_notifier callback will return
> -EMLINK.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Regards,
Hans
>
> ---
>
> * Changes since v11
> - Fixed spelling
> - Updated comment to clarify the intent that no link can be enabled if
> any video node is open.
> - Use container_of() instead of a loop to find struct vin_dev from the
> video device.
> ---
> drivers/media/platform/rcar-vin/rcar-core.c | 147 ++++++++++++++++++++++++++++
> 1 file changed, 147 insertions(+)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> index 52fad495533bc427..a1c441c1a314feb7 100644
> --- a/drivers/media/platform/rcar-vin/rcar-core.c
> +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> @@ -24,6 +24,7 @@
>
> #include <media/v4l2-async.h>
> #include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
>
> #include "rcar-vin.h"
>
> @@ -44,6 +45,151 @@
> */
> #define rvin_group_id_to_master(vin) ((vin) < 4 ? 0 : 4)
>
> +/* -----------------------------------------------------------------------------
> + * Media Controller link notification
> + */
> +
> +/* group lock should be held when calling this function. */
> +static int rvin_group_entity_to_csi_id(struct rvin_group *group,
> + struct media_entity *entity)
> +{
> + struct v4l2_subdev *sd;
> + unsigned int i;
> +
> + sd = media_entity_to_v4l2_subdev(entity);
> +
> + for (i = 0; i < RVIN_CSI_MAX; i++)
> + if (group->csi[i].subdev == sd)
> + return i;
> +
> + return -ENODEV;
> +}
> +
> +static unsigned int rvin_group_get_mask(struct rvin_dev *vin,
> + enum rvin_csi_id csi_id,
> + unsigned char channel)
> +{
> + const struct rvin_group_route *route;
> + unsigned int mask = 0;
> +
> + for (route = vin->info->routes; route->mask; route++) {
> + if (route->vin == vin->id &&
> + route->csi == csi_id &&
> + route->channel == channel) {
> + vin_dbg(vin,
> + "Adding route: vin: %d csi: %d channel: %d\n",
> + route->vin, route->csi, route->channel);
> + mask |= route->mask;
> + }
> + }
> +
> + return mask;
> +}
> +
> +/*
> + * Link setup for the links between a VIN and a CSI-2 receiver is a bit
> + * complex. The reason for this is that the register controlling routing
> + * is not present in each VIN instance. There are special VINs which
> + * control routing for themselves and other VINs. There are not many
> + * different possible links combinations that can be enabled at the same
> + * time, therefor all already enabled links which are controlled by a
> + * master VIN need to be taken into account when making the decision
> + * if a new link can be enabled or not.
> + *
> + * 1. Find out which VIN the link the user tries to enable is connected to.
> + * 2. Lookup which master VIN controls the links for this VIN.
> + * 3. Start with a bitmask with all bits set.
> + * 4. For each previously enabled link from the master VIN bitwise AND its
> + * route mask (see documentation for mask in struct rvin_group_route)
> + * with the bitmask.
> + * 5. Bitwise AND the mask for the link the user tries to enable to the bitmask.
> + * 6. If the bitmask is not empty at this point the new link can be enabled
> + * while keeping all previous links enabled. Update the CHSEL value of the
> + * master VIN and inform the user that the link could be enabled.
> + *
> + * Please note that no link can be enabled if any VIN in the group is
> + * currently open.
> + */
> +static int rvin_group_link_notify(struct media_link *link, u32 flags,
> + unsigned int notification)
> +{
> + struct rvin_group *group = container_of(link->graph_obj.mdev,
> + struct rvin_group, mdev);
> + unsigned int master_id, channel, mask_new, i;
> + unsigned int mask = ~0;
> + struct media_entity *entity;
> + struct video_device *vdev;
> + struct media_pad *csi_pad;
> + struct rvin_dev *vin = NULL;
> + int csi_id, ret;
> +
> + ret = v4l2_pipeline_link_notify(link, flags, notification);
> + if (ret)
> + return ret;
> +
> + /* Only care about link enablement for VIN nodes. */
> + if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> + !is_media_entity_v4l2_video_device(link->sink->entity))
> + return 0;
> +
> + /* If any entity is in use don't allow link changes. */
> + media_device_for_each_entity(entity, &group->mdev)
> + if (entity->use_count)
> + return -EBUSY;
> +
> + mutex_lock(&group->lock);
> +
> + /* Find the master VIN that controls the routes. */
> + vdev = media_entity_to_video_device(link->sink->entity);
> + vin = container_of(vdev, struct rvin_dev, vdev);
> + master_id = rvin_group_id_to_master(vin->id);
> +
> + if (WARN_ON(!group->vin[master_id])) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + /* Build a mask for already enabled links. */
> + for (i = master_id; i < master_id + 4; i++) {
> + if (!group->vin[i])
> + continue;
> +
> + /* Get remote CSI-2, if any. */
> + csi_pad = media_entity_remote_pad(
> + &group->vin[i]->vdev.entity.pads[0]);
> + if (!csi_pad)
> + continue;
> +
> + csi_id = rvin_group_entity_to_csi_id(group, csi_pad->entity);
> + channel = rvin_group_csi_pad_to_channel(csi_pad->index);
> +
> + mask &= rvin_group_get_mask(group->vin[i], csi_id, channel);
> + }
> +
> + /* Add the new link to the existing mask and check if it works. */
> + csi_id = rvin_group_entity_to_csi_id(group, link->source->entity);
> + channel = rvin_group_csi_pad_to_channel(link->source->index);
> + mask_new = mask & rvin_group_get_mask(vin, csi_id, channel);
> +
> + vin_dbg(vin, "Try link change mask: 0x%x new: 0x%x\n", mask, mask_new);
> +
> + if (!mask_new) {
> + ret = -EMLINK;
> + goto out;
> + }
> +
> + /* New valid CHSEL found, set the new value. */
> + ret = rvin_set_channel_routing(group->vin[master_id], __ffs(mask_new));
> +out:
> + mutex_unlock(&group->lock);
> +
> + return ret;
> +}
> +
> +static const struct media_device_ops rvin_media_ops = {
> + .link_notify = rvin_group_link_notify,
> +};
> +
> /* -----------------------------------------------------------------------------
> * Gen3 CSI2 Group Allocator
> */
> @@ -85,6 +231,7 @@ static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin)
> vin_dbg(vin, "found %u enabled VIN's in DT", group->count);
>
> mdev->dev = vin->dev;
> + mdev->ops = &rvin_media_ops;
>
> match = of_match_node(vin->dev->driver->of_match_table,
> vin->dev->of_node);
>
