Re: [PATCH v12 12/33] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/03/18 23:04, Niklas Söderlund wrote:
> There was never proper support in the VIN driver to deliver ALTERNATING
> field format to user-space, remove this field option. The problem is
> that ALTERNATING field order requires the sequence numbers of buffers
> returned to userspace to reflect if fields where dropped or not,

where -> were

With that tiny typo fixed you can add my:

Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>

Regards,

	Hans

> something which is not possible with the VIN drivers capture logic.
> 
> The VIN driver can still capture from a video source which delivers
> frames in ALTERNATING field order, but needs to combine them using the
> VIN hardware into INTERLACED field order. Before this change if a source
> was delivering fields using ALTERNATE the driver would default to
> combining them using this hardware feature. Only if the user explicitly
> requested ALTERNATE field order would incorrect frames be delivered.
> 
> The height should not be cut in half for the format for TOP or BOTTOM
> fields settings. This was a mistake and it was made visible by the
> scaling refactoring. Correct behavior is that the user should request a
> frame size that fits the half height frame reflected in the field
> setting. If not the VIN will do its best to scale the top or bottom to
> the requested format and cropping and scaling do not work as expected.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c  | 15 +----------
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 40 +++++++----------------------
>  2 files changed, 10 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index fd14be20a6604d7a..c8831e189d362c8b 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -617,7 +617,6 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case V4L2_FIELD_INTERLACED_BT:
>  		vnmc = VNMC_IM_FULL | VNMC_FOC;
>  		break;
> -	case V4L2_FIELD_ALTERNATE:
>  	case V4L2_FIELD_NONE:
>  		if (vin->continuous) {
>  			vnmc = VNMC_IM_ODD_EVEN;
> @@ -757,18 +756,6 @@ static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
>  	return 0;
>  }
>  
> -static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
> -{
> -	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
> -		/* If FS is set it's a Even field */
> -		if (vnms & VNMS_FS)
> -			return V4L2_FIELD_BOTTOM;
> -		return V4L2_FIELD_TOP;
> -	}
> -
> -	return vin->format.field;
> -}
> -
>  static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
>  {
>  	const struct rvin_video_format *fmt;
> @@ -941,7 +928,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
>  		goto done;
>  
>  	/* Capture frame */
> -	vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
> +	vin->queue_buf[slot]->field = vin->format.field;
>  	vin->queue_buf[slot]->sequence = sequence;
>  	vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
>  	vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index ebcd78b1bb6e8cb6..b76d59be64e0132d 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -121,33 +121,6 @@ static int rvin_reset_format(struct rvin_dev *vin)
>  	vin->format.colorspace	= mf->colorspace;
>  	vin->format.field	= mf->field;
>  
> -	/*
> -	 * If the subdevice uses ALTERNATE field mode and G_STD is
> -	 * implemented use the VIN HW to combine the two fields to
> -	 * one INTERLACED frame. The ALTERNATE field mode can still
> -	 * be requested in S_FMT and be respected, this is just the
> -	 * default which is applied at probing or when S_STD is called.
> -	 */
> -	if (vin->format.field == V4L2_FIELD_ALTERNATE &&
> -	    v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
> -		vin->format.field = V4L2_FIELD_INTERLACED;
> -
> -	switch (vin->format.field) {
> -	case V4L2_FIELD_TOP:
> -	case V4L2_FIELD_BOTTOM:
> -	case V4L2_FIELD_ALTERNATE:
> -		vin->format.height /= 2;
> -		break;
> -	case V4L2_FIELD_NONE:
> -	case V4L2_FIELD_INTERLACED_TB:
> -	case V4L2_FIELD_INTERLACED_BT:
> -	case V4L2_FIELD_INTERLACED:
> -		break;
> -	default:
> -		vin->format.field = RVIN_DEFAULT_FIELD;
> -		break;
> -	}
> -
>  	rvin_reset_crop_compose(vin);
>  
>  	vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
> @@ -233,15 +206,20 @@ static int __rvin_try_format(struct rvin_dev *vin,
>  	switch (pix->field) {
>  	case V4L2_FIELD_TOP:
>  	case V4L2_FIELD_BOTTOM:
> -	case V4L2_FIELD_ALTERNATE:
> -		pix->height /= 2;
> -		source->height /= 2;
> -		break;
>  	case V4L2_FIELD_NONE:
>  	case V4L2_FIELD_INTERLACED_TB:
>  	case V4L2_FIELD_INTERLACED_BT:
>  	case V4L2_FIELD_INTERLACED:
>  		break;
> +	case V4L2_FIELD_ALTERNATE:
> +		/*
> +		 * Driver dose not (yet) support outputting ALTERNATE to a
> +		 * userspace. It does support outputting INTERLACED so use
> +		 * the VIN hardware to combine the two fields.
> +		 */
> +		pix->field = V4L2_FIELD_INTERLACED;
> +		pix->height *= 2;
> +		break;
>  	default:
>  		pix->field = RVIN_DEFAULT_FIELD;
>  		break;
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux