On R-Car H3, on-chip peripheral modules that can make use of DMA are wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2. Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2], SCIF[015], and I2C[0-2]. These were initially left out because early firmware versions prohibited using SYS-DMAC2. This restriction has been lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016). Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 45 +++++++++++++++++++------------- 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 0648fe451d097f4e..849c2c7ff101c202 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1076,8 +1076,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; @@ -1093,8 +1094,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x33>, <&dmac1 0x32>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; @@ -1110,8 +1112,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x35>, <&dmac1 0x34>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; @@ -1222,8 +1225,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x51>, <&dmac1 0x50>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; @@ -1238,8 +1242,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x53>, <&dmac1 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; @@ -1302,8 +1307,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; @@ -1335,8 +1341,9 @@ clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 931>; - dmas = <&dmac1 0x91>, <&dmac1 0x90>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -1351,8 +1358,9 @@ clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 930>; - dmas = <&dmac1 0x93>, <&dmac1 0x92>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -1367,8 +1375,9 @@ clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 929>; - dmas = <&dmac1 0x95>, <&dmac1 0x94>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; -- 2.7.4
