Bus configuration will once the driver is extended to support Gen3
contain information not specific to only the directly connected parallel
subdevice. Move it to struct rvin_dev to show it's not always coupled
to the parallel subdevice.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Reviewed-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++---------
drivers/media/platform/rcar-vin/rcar-dma.c | 10 +++++-----
drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +-
drivers/media/platform/rcar-vin/rcar-vin.h | 9 ++++-----
4 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index ae0339d4ec104e8c..7e494b140aaf6b7e 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -65,10 +65,10 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
vin->digital->sink_pad = ret < 0 ? 0 : ret;
/* Find compatible subdevices mbus format */
- vin->digital->code = 0;
+ vin->mbus_code = 0;
code.index = 0;
code.pad = vin->digital->source_pad;
- while (!vin->digital->code &&
+ while (!vin->mbus_code &&
!v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
code.index++;
switch (code.code) {
@@ -76,16 +76,16 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
case MEDIA_BUS_FMT_UYVY8_2X8:
case MEDIA_BUS_FMT_UYVY10_2X10:
case MEDIA_BUS_FMT_RGB888_1X24:
- vin->digital->code = code.code;
+ vin->mbus_code = code.code;
vin_dbg(vin, "Found media bus format for %s: %d\n",
- subdev->name, vin->digital->code);
+ subdev->name, vin->mbus_code);
break;
default:
break;
}
}
- if (!vin->digital->code) {
+ if (!vin->mbus_code) {
vin_err(vin, "Unsupported media bus format for %s\n",
subdev->name);
return -EINVAL;
@@ -196,16 +196,16 @@ static int rvin_digital_parse_v4l2(struct device *dev,
if (vep->base.port || vep->base.id)
return -ENOTCONN;
- rvge->mbus_cfg.type = vep->bus_type;
+ vin->mbus_cfg.type = vep->bus_type;
- switch (rvge->mbus_cfg.type) {
+ switch (vin->mbus_cfg.type) {
case V4L2_MBUS_PARALLEL:
vin_dbg(vin, "Found PARALLEL media bus\n");
- rvge->mbus_cfg.flags = vep->bus.parallel.flags;
+ vin->mbus_cfg.flags = vep->bus.parallel.flags;
break;
case V4L2_MBUS_BT656:
vin_dbg(vin, "Found BT656 media bus\n");
- rvge->mbus_cfg.flags = 0;
+ vin->mbus_cfg.flags = 0;
break;
default:
vin_err(vin, "Unknown media bus type\n");
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 7c64f1f8ec63bcf4..ee8d991a9d223778 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -630,7 +630,7 @@ static int rvin_setup(struct rvin_dev *vin)
/*
* Input interface
*/
- switch (vin->digital->code) {
+ switch (vin->mbus_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
/* BT.601/BT.1358 16bit YCbCr422 */
vnmc |= VNMC_INF_YUV16;
@@ -638,7 +638,7 @@ static int rvin_setup(struct rvin_dev *vin)
break;
case MEDIA_BUS_FMT_UYVY8_2X8:
/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
- vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+ vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
input_is_yuv = true;
break;
@@ -647,7 +647,7 @@ static int rvin_setup(struct rvin_dev *vin)
break;
case MEDIA_BUS_FMT_UYVY10_2X10:
/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
- vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+ vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
input_is_yuv = true;
break;
@@ -659,11 +659,11 @@ static int rvin_setup(struct rvin_dev *vin)
dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
/* Hsync Signal Polarity Select */
- if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+ if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
dmr2 |= VNDMR2_HPS;
/* Vsync Signal Polarity Select */
- if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+ if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
dmr2 |= VNDMR2_VPS;
/*
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 43370c57d4b6239a..dd835be0f9cbcc05 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -191,7 +191,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 which,
pix->pixelformat == V4L2_PIX_FMT_XBGR32))
pix->pixelformat = RVIN_DEFAULT_FORMAT;
- v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
+ v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code);
/* Allow the video device to override field and to scale */
field = pix->field;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 458373af9e60ea07..92a2a196cce73d75 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -62,8 +62,6 @@ struct rvin_video_format {
* struct rvin_graph_entity - Video endpoint from async framework
* @asd: sub-device descriptor for async framework
* @subdev: subdevice matched using async framework
- * @code: Media bus format from source
- * @mbus_cfg: Media bus format from DT
* @source_pad: source pad of remote subdevice
* @sink_pad: sink pad of remote subdevice
*/
@@ -71,9 +69,6 @@ struct rvin_graph_entity {
struct v4l2_async_subdev asd;
struct v4l2_subdev *subdev;
- u32 code;
- struct v4l2_mbus_config mbus_cfg;
-
unsigned int source_pad;
unsigned int sink_pad;
};
@@ -114,6 +109,8 @@ struct rvin_info {
* @sequence: V4L2 buffers sequence number
* @state: keeps track of operation state
*
+ * @mbus_cfg: media bus configuration from DT
+ * @mbus_code: media bus format code
* @format: active V4L2 pixel format
*
* @crop: active cropping
@@ -142,6 +139,8 @@ struct rvin_dev {
unsigned int sequence;
enum rvin_dma_state state;
+ struct v4l2_mbus_config mbus_cfg;
+ u32 mbus_code;
struct v4l2_pix_format format;
struct v4l2_rect crop;
--
2.16.2
