Each Gen3 SoC has a limited set of predefined routing possibilities for
which CSI-2 device and channel can be routed to which VIN instance.
Prepare to store this information in the struct rvin_info.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
* Changes since v11
- Fixed spelling.
- Reorderd filed order in struct rvin_group_route.
- Renamed chan to channel in struct rvin_group_route.
---
drivers/media/platform/rcar-vin/rcar-vin.h | 42 ++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index d64cbb5716ab6f6a..9a68a5909fe07ec7 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -43,6 +43,14 @@ enum model_id {
RCAR_GEN3,
};
+enum rvin_csi_id {
+ RVIN_CSI20,
+ RVIN_CSI21,
+ RVIN_CSI40,
+ RVIN_CSI41,
+ RVIN_CSI_MAX,
+};
+
/**
* STOPPED - No operation in progress
* RUNNING - Operation in progress have buffers
@@ -81,12 +89,45 @@ struct rvin_graph_entity {
unsigned int sink_pad;
};
+/**
+ * struct rvin_group_route - describes a route from a channel of a
+ * CSI-2 receiver to a VIN
+ *
+ * @csi: CSI-2 receiver ID.
+ * @channel: Output channel of the CSI-2 receiver.
+ * @vin: VIN ID.
+ * @mask: Bitmask of the different CHSEL register values that
+ * allow for a route from @csi + @chan to @vin.
+ *
+ * .. note::
+ * Each R-Car CSI-2 receiver has four output channels facing the VIN
+ * devices, each channel can carry one CSI-2 Virtual Channel (VC).
+ * There is no correlation between channel number and CSI-2 VC. It's
+ * up to the CSI-2 receiver driver to configure which VC is output
+ * on which channel, the VIN devices only care about output channels.
+ *
+ * There are in some cases multiple CHSEL register settings which would
+ * allow for the same route from @csi + @channel to @vin. For example
+ * on R-Car H3 both the CHSEL values 0 and 3 allow for a route from
+ * CSI40/VC0 to VIN0. All possible CHSEL values for a route need to be
+ * recorded as a bitmask in @mask, in this example bit 0 and 3 should
+ * be set.
+ */
+struct rvin_group_route {
+ enum rvin_csi_id csi;
+ unsigned int channel;
+ unsigned int vin;
+ unsigned int mask;
+};
+
/**
* struct rvin_info - Information about the particular VIN implementation
* @model: VIN model
* @use_mc: use media controller instead of controlling subdevice
* @max_width: max input width the VIN supports
* @max_height: max input height the VIN supports
+ * @routes: list of possible routes from the CSI-2 recivers to
+ * all VINs. The list mush be NULL terminated.
*/
struct rvin_info {
enum model_id model;
@@ -94,6 +135,7 @@ struct rvin_info {
unsigned int max_width;
unsigned int max_height;
+ const struct rvin_group_route *routes;
};
/**
--
2.16.2
