This fixes an issue that a gadget driver (usb_f_fs) is possible to
stop rx transactions after the usb-dmac is used because the following
functions missed to set/check the "running" flag.
- usbhsf_dma_prepare_pop_with_usb_dmac()
- usbhsf_dma_pop_done_with_usb_dmac()
So, if next transaction uses pio, the usbhsf_prepare_pop() can not
start the transaction because the "running" flag is 0.
Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle")
Cc: <stable@xxxxxxxxxxxxxxx> # v3.19+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/renesas_usbhs/fifo.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 2d24ef3..b295e20 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -989,6 +989,10 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
goto usbhsf_pio_prepare_pop;
+ /* return at this time if the pipe is running */
+ if (usbhs_pipe_is_running(pipe))
+ return 0;
+
usbhs_pipe_config_change_bfre(pipe, 1);
ret = usbhsf_fifo_select(pipe, fifo, 0);
@@ -1179,6 +1183,7 @@ static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
usbhsf_fifo_clear(pipe, fifo);
pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+ usbhs_pipe_running(pipe, 0);
usbhsf_dma_stop(pipe, fifo);
usbhsf_dma_unmap(pkt);
usbhsf_fifo_unselect(pipe, pipe->fifo);
--
1.9.1
