Hi Mauro,
Thanks for the patch.
On 29/11/17 19:08, Mauro Carvalho Chehab wrote:
> Several comments are wrongly tagged as kernel-doc, causing
> those warnings:
>
> drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
> drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
> drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
> drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
> drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
> drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand *
> on line 652 - I thought it was a doc line
> drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
> drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module.
> on line 301 - I thought it was a doc line
> drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
> drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
> drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
> drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
> drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration
> on line 432 - I thought it was a doc line
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
> drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
> drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
> drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
> drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
> drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame
> on line 150 - I thought it was a doc line
> drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size
> on line 356 - I thought it was a doc line
> drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size
> on line 369 - I thought it was a doc line
> drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer
> on line 395 - I thought it was a doc line
> drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
> drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
> drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
> drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
> drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
> drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
> drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
> drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
> drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
> drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
> drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
> drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
> drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
> drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
> drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Acked-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxx>
For FDP1 at least :)
> ---
> drivers/media/dvb-frontends/sp887x.c | 6 +++---
> drivers/media/dvb-frontends/tua6100.c | 2 +-
> drivers/media/dvb-frontends/zl10036.c | 8 ++++----
> drivers/media/i2c/ov5647.c | 4 ++--
> drivers/media/pci/solo6x10/solo6x10-enc.c | 2 +-
> drivers/media/platform/rcar_fdp1.c | 2 +-
> drivers/media/platform/sh_veu.c | 2 +-
> drivers/media/platform/sti/hva/hva-h264.c | 18 +++++++++++++-----
> drivers/media/platform/ti-vpe/vpe.c | 2 +-
> drivers/media/platform/vim2m.c | 2 +-
> drivers/media/rc/st_rc.c | 6 +++---
> drivers/media/rc/streamzap.c | 6 +++---
> drivers/media/usb/dvb-usb/cinergyT2-fe.c | 2 +-
> drivers/media/usb/dvb-usb/dib0700_devices.c | 8 ++++----
> drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
> drivers/media/usb/dvb-usb/friio.c | 2 +-
> drivers/media/usb/gspca/ov519.c | 2 +-
> drivers/media/usb/pwc/pwc-dec23.c | 7 +++----
> drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 6 +++---
> 19 files changed, 48 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c
> index 7c511c3cd4ca..d2c402b52c6e 100644
> --- a/drivers/media/dvb-frontends/sp887x.c
> +++ b/drivers/media/dvb-frontends/sp887x.c
> @@ -57,7 +57,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
> int ret;
>
> if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
> - /**
> + /*
> * in case of soft reset we ignore ACK errors...
> */
> if (!(reg == 0xf1a && data == 0x000 &&
> @@ -130,7 +130,7 @@ static void sp887x_setup_agc (struct sp887x_state* state)
>
> #define BLOCKSIZE 30
> #define FW_SIZE 0x4000
> -/**
> +/*
> * load firmware and setup MPEG interface...
> */
> static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
> @@ -279,7 +279,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
> return 0;
> }
>
> -/**
> +/*
> * estimates division of two 24bit numbers,
> * derived from the ves1820/stv0299 driver code
> */
> diff --git a/drivers/media/dvb-frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c
> index 18e6d4c5be21..1d41abd47f04 100644
> --- a/drivers/media/dvb-frontends/tua6100.c
> +++ b/drivers/media/dvb-frontends/tua6100.c
> @@ -1,4 +1,4 @@
> -/**
> +/*
> * Driver for Infineon tua6100 pll.
> *
> * (c) 2006 Andrew de Quincey
> diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c
> index 062282739ce5..89dd65ae88ad 100644
> --- a/drivers/media/dvb-frontends/zl10036.c
> +++ b/drivers/media/dvb-frontends/zl10036.c
> @@ -1,4 +1,4 @@
> -/**
> +/*
> * Driver for Zarlink zl10036 DVB-S silicon tuner
> *
> * Copyright (C) 2006 Tino Reichardt
> @@ -157,7 +157,7 @@ static int zl10036_sleep(struct dvb_frontend *fe)
> return ret;
> }
>
> -/**
> +/*
> * register map of the ZL10036/ZL10038
> *
> * reg[default] content
> @@ -219,7 +219,7 @@ static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
> if (fbw <= 28820) {
> br = _BR_MAXIMUM;
> } else {
> - /**
> + /*
> * f(bw)=34,6MHz f(xtal)=10.111MHz
> * br = (10111/34600) * 63 * 1/K = 14;
> */
> @@ -315,7 +315,7 @@ static int zl10036_set_params(struct dvb_frontend *fe)
> || (frequency > fe->ops.info.frequency_max))
> return -EINVAL;
>
> - /**
> + /*
> * alpha = 1.35 for dvb-s
> * fBW = (alpha*symbolrate)/(2*0.8)
> * 1.35 / (2*0.8) = 27 / 32
> diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> index 34179d232a35..da39c49de503 100644
> --- a/drivers/media/i2c/ov5647.c
> +++ b/drivers/media/i2c/ov5647.c
> @@ -428,8 +428,8 @@ static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
> }
> #endif
>
> -/**
> - * @short Subdev core operations registration
> +/*
> + * Subdev core operations registration
> */
> static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
> .s_power = ov5647_sensor_power,
> diff --git a/drivers/media/pci/solo6x10/solo6x10-enc.c b/drivers/media/pci/solo6x10/solo6x10-enc.c
> index d28211bb9674..58d6b5131dd0 100644
> --- a/drivers/media/pci/solo6x10/solo6x10-enc.c
> +++ b/drivers/media/pci/solo6x10/solo6x10-enc.c
> @@ -175,7 +175,7 @@ int solo_osd_print(struct solo_enc_dev *solo_enc)
> return 0;
> }
>
> -/**
> +/*
> * Set channel Quality Profile (0-3).
> */
> void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
> diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
> index 3245bc45f4a0..b13dec3081e5 100644
> --- a/drivers/media/platform/rcar_fdp1.c
> +++ b/drivers/media/platform/rcar_fdp1.c
> @@ -1132,7 +1132,7 @@ static int fdp1_device_process(struct fdp1_ctx *ctx)
> * mem2mem callbacks
> */
>
> -/**
> +/*
> * job_ready() - check whether an instance is ready to be scheduled to run
> */
> static int fdp1_m2m_job_ready(void *priv)
> diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c
> index 15a562af13c7..dedc1b024f6f 100644
> --- a/drivers/media/platform/sh_veu.c
> +++ b/drivers/media/platform/sh_veu.c
> @@ -267,7 +267,7 @@ static void sh_veu_process(struct sh_veu_dev *veu,
> sh_veu_reg_write(veu, VEU_EIER, 1); /* enable interrupt in VEU */
> }
>
> -/**
> +/*
> * sh_veu_device_run() - prepares and starts the device
> *
> * This will be called by the framework when it decides to schedule a particular
> diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c
> index a7e5eed17ada..17f1eb0ba957 100644
> --- a/drivers/media/platform/sti/hva/hva-h264.c
> +++ b/drivers/media/platform/sti/hva/hva-h264.c
> @@ -134,7 +134,7 @@ enum hva_h264_sei_payload_type {
> SEI_FRAME_PACKING_ARRANGEMENT = 45
> };
>
> -/**
> +/*
> * stereo Video Info struct
> */
> struct hva_h264_stereo_video_sei {
> @@ -146,7 +146,9 @@ struct hva_h264_stereo_video_sei {
> u8 right_view_self_contained_flag;
> };
>
> -/**
> +/*
> + * struct hva_h264_td
> + *
> * @frame_width: width in pixels of the buffer containing the input frame
> * @frame_height: height in pixels of the buffer containing the input frame
> * @frame_num: the parameter to be written in the slice header
> @@ -352,7 +354,9 @@ struct hva_h264_td {
> u32 addr_brc_in_out_parameter;
> };
>
> -/**
> +/*
> + * struct hva_h264_slice_po
> + *
> * @ slice_size: slice size
> * @ slice_start_time: start time
> * @ slice_stop_time: stop time
> @@ -365,7 +369,9 @@ struct hva_h264_slice_po {
> u32 slice_num;
> };
>
> -/**
> +/*
> + * struct hva_h264_po
> + *
> * @ bitstream_size: bitstream size
> * @ dct_bitstream_size: dtc bitstream size
> * @ stuffing_bits: number of stuffing bits inserted by the encoder
> @@ -391,7 +397,9 @@ struct hva_h264_task {
> struct hva_h264_po po;
> };
>
> -/**
> +/*
> + * struct hva_h264_ctx
> + *
> * @seq_info: sequence information buffer
> * @ref_frame: reference frame buffer
> * @rec_frame: reconstructed frame buffer
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index 45bd10544189..e395aa85c8ad 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -926,7 +926,7 @@ static struct vpe_ctx *file2ctx(struct file *file)
> * mem2mem callbacks
> */
>
> -/**
> +/*
> * job_ready() - check whether an instance is ready to be scheduled to run
> */
> static int job_ready(void *priv)
> diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
> index 7bf9fa2f8534..065483e62db4 100644
> --- a/drivers/media/platform/vim2m.c
> +++ b/drivers/media/platform/vim2m.c
> @@ -343,7 +343,7 @@ static void schedule_irq(struct vim2m_dev *dev, int msec_timeout)
> * mem2mem callbacks
> */
>
> -/**
> +/*
> * job_ready() - check whether an instance is ready to be scheduled to run
> */
> static int job_ready(void *priv)
> diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c
> index a8e39c635f34..d2efd7b2c3bc 100644
> --- a/drivers/media/rc/st_rc.c
> +++ b/drivers/media/rc/st_rc.c
> @@ -49,7 +49,7 @@ struct st_rc_device {
> #define IRB_RX_NOISE_SUPPR 0x5c /* noise suppression */
> #define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */
>
> -/**
> +/*
> * IRQ set: Enable full FIFO 1 -> bit 3;
> * Enable overrun IRQ 1 -> bit 2;
> * Enable last symbol IRQ 1 -> bit 1:
> @@ -72,7 +72,7 @@ static void st_rc_send_lirc_timeout(struct rc_dev *rdev)
> ir_raw_event_store(rdev, &ev);
> }
>
> -/**
> +/*
> * RX graphical example to better understand the difference between ST IR block
> * output and standard definition used by LIRC (and most of the world!)
> *
> @@ -317,7 +317,7 @@ static int st_rc_probe(struct platform_device *pdev)
> device_init_wakeup(dev, true);
> dev_pm_set_wake_irq(dev, rc_dev->irq);
>
> - /**
> + /*
> * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
> * lircd expects a long space first before a signal train to sync.
> */
> diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
> index 4eebfcfc10f3..c9a70fda88a8 100644
> --- a/drivers/media/rc/streamzap.c
> +++ b/drivers/media/rc/streamzap.c
> @@ -191,7 +191,7 @@ static void sz_push_half_space(struct streamzap_ir *sz,
> sz_push_full_space(sz, value & SZ_SPACE_MASK);
> }
>
> -/**
> +/*
> * streamzap_callback - usb IRQ handler callback
> *
> * This procedure is invoked on reception of data from
> @@ -321,7 +321,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
> return NULL;
> }
>
> -/**
> +/*
> * streamzap_probe
> *
> * Called by usb-core to associated with a candidate device
> @@ -450,7 +450,7 @@ static int streamzap_probe(struct usb_interface *intf,
> return retval;
> }
>
> -/**
> +/*
> * streamzap_disconnect
> *
> * Called by the usb core when the device is removed from the system.
> diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
> index f9772ad0a2a5..5a2f81311fb7 100644
> --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
> +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
> @@ -26,7 +26,7 @@
> #include "cinergyT2.h"
>
>
> -/**
> +/*
> * convert linux-dvb frontend parameter set into TPS.
> * See ETSI ETS-300744, section 4.6.2, table 9 for details.
> *
> diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
> index 92098c1b78e5..366b05529915 100644
> --- a/drivers/media/usb/dvb-usb/dib0700_devices.c
> +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
> @@ -1677,10 +1677,10 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
> return -EINVAL;
> }
>
> - /** Update PLL if needed ratio **/
> + /* Update PLL if needed ratio */
> state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
>
> - /** Get optimize PLL ratio to remove spurious **/
> + /* Get optimize PLL ratio to remove spurious */
> pll_ratio = dib8090_compute_pll_parameters(fe);
> if (pll_ratio == 17)
> timf = 21387946;
> @@ -1691,7 +1691,7 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
> else
> timf = 18179756;
>
> - /** Update ratio **/
> + /* Update ratio */
> state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
>
> state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
> @@ -3357,7 +3357,7 @@ static int novatd_sleep_override(struct dvb_frontend* fe)
> return state->sleep(fe);
> }
>
> -/**
> +/*
> * novatd_frontend_attach - Nova-TD specific attach
> *
> * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
> diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
> index 41261317bd5c..b6046e0e07f6 100644
> --- a/drivers/media/usb/dvb-usb/friio-fe.c
> +++ b/drivers/media/usb/dvb-usb/friio-fe.c
> @@ -297,7 +297,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
> }
>
>
> -/**
> +/*
> * (reg, val) commad list to initialize this module.
> * captured on a Windows box.
> */
> diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
> index 62abe6c43a32..16875945e662 100644
> --- a/drivers/media/usb/dvb-usb/friio.c
> +++ b/drivers/media/usb/dvb-usb/friio.c
> @@ -21,7 +21,7 @@ MODULE_PARM_DESC(debug,
>
> DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>
> -/**
> +/*
> * Indirect I2C access to the PLL via FE.
> * whole I2C protocol data to the PLL is sent via the FE's I2C register.
> * This is done by a control msg to the FE with the I2C data accompanied, and
> diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
> index f1537daf4e2e..1b30434b72ef 100644
> --- a/drivers/media/usb/gspca/ov519.c
> +++ b/drivers/media/usb/gspca/ov519.c
> @@ -1,4 +1,4 @@
> -/**
> +/*
> * OV519 driver
> *
> * Copyright (C) 2008-2011 Jean-François Moine <moinejf@xxxxxxx>
> diff --git a/drivers/media/usb/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c
> index 3792fedff951..1283b3bd9800 100644
> --- a/drivers/media/usb/pwc/pwc-dec23.c
> +++ b/drivers/media/usb/pwc/pwc-dec23.c
> @@ -649,11 +649,10 @@ static void DecompressBand23(struct pwc_dec23_private *pdec,
> }
>
> /**
> - *
> * Uncompress a pwc23 buffer.
> - *
> - * src: raw data
> - * dst: image output
> + * @pdev: pointer to pwc device's internal struct
> + * @src: raw data
> + * @dst: image output
> */
> void pwc_dec23_decompress(struct pwc_device *pdev,
> const void *src,
> diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
> index b842f367249f..a142b9dc0feb 100644
> --- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
> +++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
> @@ -76,7 +76,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
> #define TTUSB_REV_2_2 0x22
> #define TTUSB_BUDGET_NAME "ttusb_stc_fw"
>
> -/**
> +/*
> * since we're casting (struct ttusb*) <-> (struct dvb_demux*) around
> * the dvb_demux field must be the first in struct!!
> */
> @@ -713,7 +713,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
> }
> }
>
> - /**
> + /*
> * if length is valid and we reached the end:
> * goto next muxpack
> */
> @@ -729,7 +729,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
> /* maximum bytes, until we know the length */
> ttusb->muxpack_len = 2;
>
> - /**
> + /*
> * no muxpacks left?
> * return to search-sync state
> */
>
