[PATCH v12 0/2] rcar-csi2: add Renesas R-Car MIPI CSI-2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This is the latest incarnation of R-Car MIPI CSI-2 receiver driver. It's
based on top of the media-tree and are tested on Renesas Salvator-X
together with the out-of-tree patches for rcar-vin to add support for
Gen3 VIN.

I hope this is the last incarnation of this patch-set, I do think it is 
ready for upstream consumption :-)

* Changes since v11
- Added missing call to v4l2_async_notifier_unregister().
- Fixed missing reg popery in bindings documentation.
- Add Rob's ack to 01/02.
- Dropped 'media:' prefix from patch subjects as it seems they are added 
  first when a patch is picked up by the maintainer.
- Fixed typo in comment enpoint -> endpoint, thanks Hans.
- Added Hans Reviewed-by to driver.

* Changes since v10
- Renamed Documentation/devicetree/bindings/media/rcar-csi2.txt to
  Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
- Add extra newline in rcar_csi2_code_to_fmt()
- Use locally stored format information instead of reading it from the
  remote subdevice, Sakari pointed out that the pipeline is validated
  before .s_stream() is called so this is safe.
- Do not check return from media_entity_to_v4l2_subdev() in
  rcar_csi2_start(), Sakari pointed out it can't fail. Also move logic
  to find the remote subdevice is moved to the only user of it,
  rcar_csi2_calc_phypll().
- Move pm_runtime_get_sync() and pm_runtime_put() to
  rcar_csi2_s_stream() and remove rcar_csi2_s_power().
- Add validation of pixel code to rcar_csi2_set_pad_format().
- Remove static rcar_csi2_notify_unbind() as it only printed a debug
  message.

* Changes since v9
- Add reset property to device tree example
- Use BIT(x) instead of (1 << x)
- Use u16 in struct phypll_hsfreqrange to pack struct better.
- Use unsigned int type for loop variable in rcar_csi2_code_to_fmt
- Move fields inside struct struct rcar_csi2_info and struct rcar_csi2
  to pack struct's tighter.
- Use %u instead of %d when printing __u32.
- Don't check return of platform_get_resource(), let
  devm_ioremap_resource() handle it.
- Store quirk workaround for r8a7795 ES1.0 in the data field of struct
  soc_device_attribute.

Changes since v8:
- Updated bindings documentation, thanks Rob!
- Make use of the now in media-tree sub-notifier V4L2 API
- Add delay when resetting the IP to allow for a proper reset
- Fix bug in s_stream error path where the usage count was off if an
  error was hit.
- Add support for H3 ES2.0

Changes since v7:
- Rebase on top of the latest incremental async patches.
- Fix comments on DT documentation.
- Use v4l2_ctrl_g_ctrl_int64() instead of v4l2_g_ext_ctrls().
- Handle try formats in .set_fmt() and .get_fmt().
- Don't call v4l2_device_register_subdev_nodes() as this is not needed
  with the complete() callbacks synchronized.
- Fix line over 80 chars.
- Fix varies spelling mistakes.

Changes since v6:
- Rebased on top of Sakaris fwnode patches.
- Changed of RCAR_CSI2_PAD_MAX to NR_OF_RCAR_CSI2_PAD.
- Remove assumption about unknown media bus type, thanks Sakari for
  pointing this out.
- Created table for supported format information instead of scattering
  this information around the driver, thanks Sakari!
- Small newline fixes and reduce some indentation levels

Changes since v5:
- Make use of the incremental async subnotifer and helper to map DT
  endpoint to media pad number. This moves functionality which
  previously in the Gen3 patches for R-Car VIN driver to this R-Car
  CSI-2 driver. This is done in preparation to support the ADV7482
  driver in development by Kieran which will register more then one
  subdevice and the CSI-2 driver needs to cope wit this. Further more it
  prepares the driver for another use-case where more then one subdevice
  is present upstream for the CSI-2.
- Small cleanups.
- Add explicit include for linux/io.h, thanks Kieran.

Changes since v4:
- Match SoC part numbers and drop trailing space in documentation,
  thanks Geert for pointing this out.
- Clarify that the driver is a CSI-2 receiver by supervised
  s/interface/receiver/, thanks Laurent.
- Add entries in Kconfig and Makefile alphabetically instead of append.
- Rename struct rcar_csi2 member swap to lane_swap.
- Remove macros to wrap calls to dev_{dbg,info,warn,err}.
- Add wrappers for ioread32 and iowrite32.
- Remove unused interrupt handler, but keep checking in probe that there
  are a interrupt define in DT.
- Rework how to wait for LP-11 state, thanks Laurent for the great idea!
- Remove unneeded delay in rcar_csi2_reset()
- Remove check for duplicated lane id:s from DT parsing. Broken out to a
  separate patch adding this check directly to v4l2_of_parse_endpoint().
- Fixed rcar_csi2_start() to ask it's source subdevice for information
  about pixel rate and frame format. With this change having
  {set,get}_fmt operations became redundant, it was only used for
  figuring out this out so dropped them.
- Tabulated frequency settings map.
- Dropped V4L2_SUBDEV_FL_HAS_DEVNODE it should never have been set.
- Switched from MEDIA_ENT_F_ATV_DECODER to
  MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as entity function. I can't
  find a more suitable function, and what the hardware do is to fetch
  video from an external chip and passes it on to a another SoC internal
  IP it's sort of a formatter.
- Break out DT documentation and code in two patches.

Changes since v3:
- Update DT binding documentation with input from Geert Uytterhoeven,
  thanks!

Changes since v2:
- Added media control pads as this is needed by the new rcar-vin driver.
- Update DT bindings after review comments and to add r8a7796 support.
- Add get_fmt handler.
- Fix media bus format error s/YUYV8/UYVY8/

Changes since v1:
- Drop dependency on a pad aware s_stream operation.
- Use the DT bindings format "renesas,<soctype>-<device>", thanks Geert
  for pointing this out.

Niklas Söderlund (2):
  rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver

 .../bindings/media/renesas,rcar-csi2.txt           | 105 +++
 MAINTAINERS                                        |   1 +
 drivers/media/platform/rcar-vin/Kconfig            |  12 +
 drivers/media/platform/rcar-vin/Makefile           |   1 +
 drivers/media/platform/rcar-vin/rcar-csi2.c        | 898 +++++++++++++++++++++
 5 files changed, 1017 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
 create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c

-- 
2.15.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux