Hi Vladimir,
Thank you for the patch.
On Friday 07 Jul 2017 05:37:36 Vladimir Barinov wrote:
> From: Vladimir Barinov <vladimir.barinov+renesas@xxxxxxxxxxxxxxxxxx>
>
> The ULCB board has one HDMI output connector.
>
> This connector is available on both the H3 and M3-W ULCB boards.
> Add this to the ulcb.dtsi file.
>
> Signed-off-by: Vladimir Barinov
> <vladimir.barinov+renesas@xxxxxxxxxxxxxxxxxx> ---
> arch/arm64/boot/dts/renesas/ulcb.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi
> b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 6f0a7ca..fc5408d 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
> @@ -34,6 +34,17 @@
> clock-frequency = <11289600>;
> };
>
> + hdmi0-out {
> + compatible = "hdmi-connector";
> + label = "HDMI0 OUT";
As far as I know there is no "HDMI0 OUT" label on the board or casing. You can
remove the label property. Apart from that,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + type = "a";
> +
> + port {
> + hdmi0_con: endpoint {
> + };
> + };
> + };
> +
> keyboard {
> compatible = "gpio-keys";
--
Regards,
Laurent Pinchart
