On 06/29/2017 01:41 PM, Geert Uytterhoeven wrote: > Hi Marek, > > On Thu, Jun 29, 2017 at 12:18 PM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote: >> From: Marek Vasut <marek.vasut+renesas@xxxxxxxxx> >> >> Update IDT VersaClock 6 driver to support 5P49V6901. This chip has > > Update the IDT VersaClock5 driver to support the VersaClock6 5P49V6901? > >> two clock inputs (external XTAL or external CLKIN), four fractional >> dividers (FODs) and five clock outputs (four universal clock outputs >> and one reference clock output at OUT0_SELB_I2C). >> >> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx> >> Cc: Alexey Firago <alexey_firago@xxxxxxxxxx> >> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx> >> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx> >> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> >> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx >> --- >> drivers/clk/clk-versaclock5.c | 11 +++++++++++ > > and > > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -210,14 +210,14 @@ config COMMON_CLK_OXNAS > Support for the OXNAS SoC Family clocks. > > config COMMON_CLK_VC5 > - tristate "Clock driver for IDT VersaClock5 devices" > + tristate "Clock driver for IDT VersaClock5/6 devices" > depends on I2C > depends on OF > select REGMAP_I2C > help > ---help--- > - This driver supports the IDT VersaClock5 programmable clock > - generator. > + This driver supports the IDT VersaClock5 and VersaClock6 > + programmable clock generator. Tweaked a bit more, but yes, good point. -- Best regards, Marek Vasut
