On Fri, May 12, 2017 at 11:49:24AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Fri, May 12, 2017 at 9:32 AM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> > On Thu, May 11, 2017 at 05:42:27PM +0200, Geert Uytterhoeven wrote:
> >> On Thu, May 11, 2017 at 4:53 PM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> >> > On Thu, May 11, 2017 at 01:58:52PM +0200, Geert Uytterhoeven wrote:
> >> >> Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
> >> >> - The following devices no longer exist on ES2.0, and are thus removed:
> >> >> fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
> >> >> - The DU <-> VSPD topology is different on ES2.0, hence remove the
> >> >> "compatible" and "vsps" properties from the DU node until the driver
> >> >> can handle this.
> >> >>
> >> >> Move support for the ES1.x revision of the R-Car H3 SoC into a
> >> >> separate file. To avoid duplication, r8a7795-es1.dtsi includes
> >> >> r8a7795.dtsi, add adds/removes/overrides device nodes and properties
> >> >> where needed.
> >> >
> >> > I think the above should be re-worded given your explanation below the
> >> > scissors that no deletion or overriding occurs.
> >>
> >> I wanted to document clearly what needs to be done in the generic case...
> >> I agree no removal or override is done right now.
> >>
> >> If you prefer it that way, I can reword it.
> >
> > I think I would prefer that.
> >
> >> >> Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
> >> >> to r8a7795-es1.dtsi to preserve compatibility.
> >> >>
> >> >> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >> >> ---
> >> >> While currently r8a7795-es1.dtsi only adds device nodes, removal of
> >> >> devices nodes and properties can be implemented using the /delete-node/
> >> >> and /delete-property/ keywords, as shown below:
> >> >>
> >> >> &soc {
> >> >> /delete-node/ <name>@<addr>;
> >> >> };
> >> >>
> >> >> &<label> {
> >> >> /delete-property/ <prop>;
> >> >> };
> >> >
> >> > I would be interested to also see an example of an override and
> >> > for the examples to be included in the changelog itself.
> >>
> >> You mean above the scissors? ;-)
> >
> > Yes, that is what I meant.
> >
> >> Currently we don't have any devices or properties in DT that need removals
> >> or overrides. Note that I did test those.
> >>
> >> If we add the "vsps" property to the DU node for ES2.0, we can have an
> >> override for it now. But we've plenty of experience with letting .dts
> >> override properties in .dtsi.
> >
> > Ok, point taken.
> >
> >> For node deletion, we'll have to wait until someone enables the extra USB
> >> channels on ES2.0.
> >>
> >> For property deletion, I don't have an actual example in mind, but I wanted
> >> to be sure that worked in case we ever need it.
> >
> > I appreciate you taking the time to test deletion.
> > I think its worth documenting above the scissors.
>
> Will update in v4. I''l have to rebase anyway.
Great, thanks!
