Re: [PATCH 05/10] clk: renesas: Add r8a7793 CPG Core Clock Definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On 2017-04-25 18:53:15 +0200, Geert Uytterhoeven wrote:
> Add all R-Car M2-N Clock Pulse Generator Core Clock Outputs, as listed
> in Table 7.2b ("List of Clocks [R-Car M2-W/M2-N]") of the R-Car Gen2
> Hardware User's Manual rev. 2.00.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
>  include/dt-bindings/clock/r8a7793-cpg-mssr.h | 48 ++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 include/dt-bindings/clock/r8a7793-cpg-mssr.h
> 
> diff --git a/include/dt-bindings/clock/r8a7793-cpg-mssr.h b/include/dt-bindings/clock/r8a7793-cpg-mssr.h
> new file mode 100644
> index 0000000000000000..8809b0f62d615457
> --- /dev/null
> +++ b/include/dt-bindings/clock/r8a7793-cpg-mssr.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (C) 2015 Renesas Electronics Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__
> +#define __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__
> +
> +#include <dt-bindings/clock/renesas-cpg-mssr.h>
> +
> +/* r8a7793 CPG Core Clocks */
> +#define R8A7793_CLK_Z			0
> +#define R8A7793_CLK_ZG			1
> +#define R8A7793_CLK_ZTR			2
> +#define R8A7793_CLK_ZTRD2		3
> +#define R8A7793_CLK_ZT			4
> +#define R8A7793_CLK_ZX			5
> +#define R8A7793_CLK_ZS			6
> +#define R8A7793_CLK_HP			7
> +#define R8A7793_CLK_I			8
> +#define R8A7793_CLK_B			9
> +#define R8A7793_CLK_LB			10
> +#define R8A7793_CLK_P			11
> +#define R8A7793_CLK_CL			12
> +#define R8A7793_CLK_M2			13
> +#define R8A7793_CLK_ADSP		14
> +#define R8A7793_CLK_ZB3			15
> +#define R8A7793_CLK_ZB3D2		16
> +#define R8A7793_CLK_DDR			17
> +#define R8A7793_CLK_SDH			18
> +#define R8A7793_CLK_SD0			19
> +#define R8A7793_CLK_SD2			20
> +#define R8A7793_CLK_SD3			21
> +#define R8A7793_CLK_MMC0		22
> +#define R8A7793_CLK_MP			23
> +#define R8A7793_CLK_SSP			24
> +#define R8A7793_CLK_SSPRS		25
> +#define R8A7793_CLK_QSPI		26
> +#define R8A7793_CLK_CP			27
> +#define R8A7793_CLK_RCAN		28
> +#define R8A7793_CLK_R			29
> +#define R8A7793_CLK_OSC			30

The last two are called RCLK and OSCCLK in the Table 7.2b ("List of 
Clocks [R-Car M2-W/M2-N]"). I'm  sure this is intentional on your side, 
and if so:

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

> +
> +#endif /* __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__ */
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux