Hi Geert,
On 2017-04-25 18:53:12 +0200, Geert Uytterhoeven wrote:
> Add all R-Car H2 Clock Pulse Generator Core Clock Outputs, as listed in
> Table 7.2a ("List of Clocks [R-Car H2]") of the R-Car Gen2 Hardware
> User's Manual rev. 2.00.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> include/dt-bindings/clock/r8a7790-cpg-mssr.h | 52 ++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
> create mode 100644 include/dt-bindings/clock/r8a7790-cpg-mssr.h
>
> diff --git a/include/dt-bindings/clock/r8a7790-cpg-mssr.h b/include/dt-bindings/clock/r8a7790-cpg-mssr.h
> new file mode 100644
> index 0000000000000000..1625b8bf34822b6e
> --- /dev/null
> +++ b/include/dt-bindings/clock/r8a7790-cpg-mssr.h
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2015 Renesas Electronics Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_R8A7790_CPG_MSSR_H__
> +#define __DT_BINDINGS_CLOCK_R8A7790_CPG_MSSR_H__
> +
> +#include <dt-bindings/clock/renesas-cpg-mssr.h>
> +
> +/* r8a7790 CPG Core Clocks */
> +#define R8A7790_CLK_Z 0
> +#define R8A7790_CLK_Z2 1
> +#define R8A7790_CLK_ZG 2
> +#define R8A7790_CLK_ZTR 3
> +#define R8A7790_CLK_ZTRD2 4
> +#define R8A7790_CLK_ZT 5
> +#define R8A7790_CLK_ZX 6
> +#define R8A7790_CLK_ZS 7
> +#define R8A7790_CLK_HP 8
> +#define R8A7790_CLK_I 9
> +#define R8A7790_CLK_B 10
> +#define R8A7790_CLK_LB 11
> +#define R8A7790_CLK_P 12
> +#define R8A7790_CLK_CL 13
> +#define R8A7790_CLK_M2 14
> +#define R8A7790_CLK_ADSP 15
> +#define R8A7790_CLK_IMP 16
> +#define R8A7790_CLK_ZB3 17
> +#define R8A7790_CLK_ZB3D2 18
> +#define R8A7790_CLK_DDR 19
> +#define R8A7790_CLK_SDH 20
> +#define R8A7790_CLK_SD0 21
> +#define R8A7790_CLK_SD1 22
> +#define R8A7790_CLK_SD2 23
> +#define R8A7790_CLK_SD3 24
> +#define R8A7790_CLK_MMC0 25
> +#define R8A7790_CLK_MMC1 26
> +#define R8A7790_CLK_MP 27
> +#define R8A7790_CLK_SSP 28
> +#define R8A7790_CLK_SSPRS 29
> +#define R8A7790_CLK_QSPI 30
> +#define R8A7790_CLK_CP 31
> +#define R8A7790_CLK_RCAN 32
> +#define R8A7790_CLK_R 33
> +#define R8A7790_CLK_OSC 34
The last two are called RCLR and OSCCLK in the Table 7.2a ("List of
Clocks [R-Car H2]"). I'm sure this is intentional on your side, and if
so:
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> +
> +#endif /* __DT_BINDINGS_CLOCK_R8A7790_CPG_MSSR_H__ */
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
