Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI1.
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
* Compile tested only; no access to silk board
v3
* Added missing pinctrl-1 to sdhi0
v2
* Correct mangled addition of sdhi*_pins
---
arch/arm/boot/dts/r8a7794-silk.dts | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 4cb5278d104d..8b416c385df7 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -196,6 +196,13 @@
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
};
qspi_pins: qspi {
@@ -338,11 +345,13 @@
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ sd-uhs-sdr50;
status = "okay";
};
--
2.12.2.816.g2cccc81164
