On 04/18/2017 09:09 PM, Geert Uytterhoeven wrote:
> Hi Marek,
Hi!
> On Tue, Apr 18, 2017 at 9:05 PM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
>> On 04/18/2017 03:59 PM, Geert Uytterhoeven wrote:
>>> On Sun, Apr 16, 2017 at 6:57 PM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
>>>> --- a/arch/arm/boot/dts/r8a7791.dtsi
>>>> +++ b/arch/arm/boot/dts/r8a7791.dtsi
>>>> @@ -776,6 +776,15 @@
>>>> status = "disabled";
>>>> };
>>>>
>>>> + adc: adc@e6e54000 {
>>>> + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
>>>> + reg = <0 0xe6e54000 0 64>;
>>>> + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>, <&adc_clk>;
>>>> + clock-names = "fck", "if";
>>>> + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> scif2: serial@e6e58000 {
>>>> compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
>>>> "renesas,scif";
>>>> @@ -1133,6 +1142,13 @@
>>>> clock-frequency = <0>;
>>>> };
>>>>
>>>> + /* GyroADC clock */
>>>> + adc_clk: adc_clk {
>>>> + compatible = "fixed-clock";
>>>> + #clock-cells = <0>;
>>>> + clock-frequency = <65000000>;
>>>> + };
>>>
>>> Why do you have to add a clock?
>>> I think you should just refer to the on-SoC peripheral clock: &cp_clk.
>>
>> I think you are right, in fact, see below ...
>>
>>>> +
>>>> /* Special CPG clocks */
>>>> cpg_clocks: cpg_clocks@e6150000 {
>>>> compatible = "renesas,r8a7791-cpg-clocks",
>>>> @@ -1432,6 +1448,7 @@
>>>> <&hp_clk>, <&hp_clk>;
>>>
>>> Missing addition of the parent clock for the newly added module clock.
>>> Perhaps this should be the peripheral clock (<&cp_clk>)?
>>>
>>> Oops, that means there's no need to have two clock inputs in the adc device
>>> node, and thus we screwed up when reviewing the GyroADC bindings :-(
>>
>> I think you're right. I should be just getting the clk rate of the fck
>> and derive the gyroadc timings from that, correct ? I can send a patch
>> for the driver to just ignore the second clock entry and update the DT
>> binding document to drop the "if" clock (?) .
>
> Fine for me. Thanks!
OK, patches are ready. I need to find koelsch to test on ..
--
Best regards,
Marek Vasut
